Since 2016, OSHA inspectors have visited Canfor Southern Pine Inc in South Carolina 5 times.
The most recent inspection opened on Sep 7, 2023 after a complaint, in Cassatt.
In all, OSHA issued 7 citation items: 5 serious and 2 other-than-serious.
The proposed penalties came to $24,050; today they stand at $23,000, 4% less.
The rule cited most here is 1910.212 (machine guarding), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Canfor Southern Pine Inc averages $5,750 across 4 cited inspections.
Canfor Southern Pine Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
South Carolina · latest 90 days of OSHA records
41employers cited
Get notified the morning OSHA posts each new citation in South Carolina: the employer, the site address, the rules broken and the penalty.
OSHA records show Canfor Southern Pine Inc at 7 sites in 3 states. Together they've had 8 inspections and $39,389 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 7 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Estill site logged 9 recordable injuries or illnesses among about 190 workers: 3.7 per 100 full-time workers, against a median of 4.2 for its industry. Those cases cost 64 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
CSP Estill
Estill · 2020
190
9
4
3.7
4.2
CSP Conway
Conway · 2020
192
7
0
3.4
4.2
CSP Camden
Cassatt · 2020
182
2
2
1.0
4.2
CSP Darlington
Darlington · 2020
127
7
0
6.9
4.2
Included with any plan: 3 more yearly logs from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(d)(2)
(2) Machine or equipment shutdown. The machine or equipment shall be turned off or shut down using the procedures established for the machine or equipment. An orderly shutdown must be utilized to avoid any additional or increased hazard(s) to employees as a result of the equipment stoppage.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(q)(10)
(10) Industrial trucks shall be kept in a clean condition, free of lint, excess oil, and grease. Noncombustible agents should be used for cleaning trucks. Low flash point (below 100 °F.) solvents shall not be used. High flash point (at or above 100 °F.) solvents may be used. Precautions regarding toxicity, ventilation, and fire hazard shall be consonant with the agent or solvent used.
Alert subscribers get notified of each newly cited employer in South Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.