OSHA SearchOSHA records by employer

Casework Logic, LLC.: OSHA inspections and violations

Littleton, Colorado · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
4citation items
$2,900current penalties
Feb 24, 2022last inspection

Casework Logic, LLC. has one OSHA inspection on record in Colorado.

OSHA opened it on Feb 24, 2022 after a complaint, in Littleton.

From that inspection OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

OSHA proposed $5,801 in penalties. After settlements and reviews the total is $2,900, down 50%.

Most often, OSHA cited 1910.213, woodworking machinery (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Casework Logic, LLC. averages $2,900 over 1 cited inspection in that time.

Casework Logic, LLC.: OSHA citation items per year, 2022 to 2022
Citation items per year, by inspection date.

Want to know if OSHA cites Casework Logic, LLC. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 345802060 OPENED FEB 24, 2022Closed

Complaint · Partial · Safety · 12 employees at the site · Closed Apr 25, 2022

5251 South Rio Grande Street, Littleton, CO 80120 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$5,801$2,900Mar 15, 2022Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$0$0Mar 15, 2022Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Mar 15, 2022Final
Citation 2, item 1
29 CFR 1910.178(q)(7) · Forklifts and other powered industrial trucks
 Other-than-serious$0$0Mar 15, 2022Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(q)(7)

(7) Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other wood kitchen cabinet and countertop manufacturing employers in Colorado

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.