Clifton Moulding Corp.: OSHA inspections and violations
Clifton, Texas · Other Millwork (including Flooring) · NAICS 321918
10inspections
26citation items
$39,623current penalties
Nov 15, 2021last inspection
Clifton Moulding Corp. has 10 OSHA inspections on record in Texas, the first in 2001.
OSHA's last visit started on Nov 15, 2021 on a referral, in Clifton.
Across those inspections OSHA issued 26 citation items: 22 serious and 4 other-than-serious.
OSHA proposed $49,289 in penalties. After settlements and reviews the total is $39,623, down 20%.
Most often, OSHA cited 1910.95, noise (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Clifton Moulding Corp. averages $5,348 over 5 cited inspections in that time.
Clifton Moulding Corp. also files yearly injury logs with OSHA, summarized below.
It reported 7 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Nov 5, 2021: Employee incurs multiple injuries when caught in rotating sh
At approximately 10:35 a.m. on November 5, 2021, an employee cleaned up dust in the mill house. The employee was shoveling dust at the mill house. His clothing was caught on the rotating shaft of the hammer mill, pulling him towards the machine and then throwing him to the ground. The employee fractured four ribs, fractured iliac, lacerated kidney, and sustained contusions to elbow and leg of the right side of the body. The employee was hospitalized to treat these injuries.
Incident on Nov 15, 2018: Employee partially amputates thumb and index fingertip when
At 9:00 a.m. on November 15, 2018, an employee was using an air hose to spray wood shavings off of the machine and put her hand within the moving parts of the moulder machine. The employee amputated the tip of her index finger and thumb when struck by the moving parts. Hospitalization was not required.
Incident on May 19, 2018: Employee sustains amputation from finger jointer
At 2:30 p.m. on May 19, 2018, an employee was feeding blocks on a finger jointer when her left pinky finger was caught between the lug and feeder plate, resulting in an amputation. The employee was not hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Clifton site logged 0 recordable injuries or illnesses among about 7 workers: 0.0 per 100 full-time workers, against a median of 3.5 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Clifton Moulding
Clifton · 2025
7
0
0
0.0
3.5
Clifton Moulding Corp.
Clifton · 2021
139
20
10
12.6
4.6
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 7 reports on file, the 6 most recent shown.
A saw blade detached from equipment, moved across the floor, and struck an employee's foot amputating the big toe.
Nov 5, 2021, Clifton: Hospitalization · fractures and other injuries, n.e.c. · multiple trunk locations
An employee was shoveling dust at a mill house. His clothing caught on the rotating shaft of a hammer mill, and he was pulled toward the machine and thrown to the ground. He suffered four fractured ribs, a fractured iliac crest, a lacerated kidney, and contusions to his elbow and leg, all on the right side of his body. He was hospitalized.
An employee was feeding boards into a moulder when the machine jammed. As the employee went to remove the jammed board, the moulder head contacted his left ring and little fingers, resulting in fractures. The left ring finger was subsequently amputated at the knuckle closest to the palm of his hand.
An employee was grading mouldings on a moulder machine. When she attempted to blow off the machine with an air hose, her hand went between the guard and the moulder head. The moulder cutter head amputated her right thumb and index fingers from the end of the nailbed to the tip.
An employee was feeding blocks on the finger jointer and got her left pinky finger caught between the lug and the feeder plate amputating it at the first digit.
An employee was operating the finger joint machine and amputated the tip of his left middle finger above the first knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.10 · Recording criteria for cases involving occupational hearing loss
29 CFR 1904.10(a)
(a) Basic requirement. If an employee's hearing test (audiogram) reveals that the employee has experienced a work-related Standard Threshold Shift (STS) in hearing in one or both ears, and the employee's total hearing level is 25 decibels (dB) or more above audiometric zero (averaged at 2000, 3000, and 4000 Hz) in the same ear(s) as the STS, you must record the case on the OSHA 300 Log.
(3) How do I certify the annual summary? A company executive must certify that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete.
(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.