Since 2012, OSHA inspectors have visited Coastal Forest Products in Alabama 10 times.
The most recent inspection opened on May 6, 2021 after a complaint, in Chapman.
In all, OSHA issued 12 citation items: 7 serious, 2 repeat and 3 other-than-serious.
The proposed penalties came to $182,249; today they stand at $102,550, 44% less.
The rule cited most here is 1910.147 (lockout/tagout), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Coastal Forest Products averages $19,920 across 5 cited inspections.
Coastal Forest Products also files yearly injury logs with OSHA, summarized below.
It reported 6 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Incident on Feb 21, 2020: Employee amputates fingertip in unguarded moving chain and s
At 7:35 a.m. on February 21, 2020, an employee was stepping over conduit, while walking on a locked-out waste material vibrating conveyor. The employee slipped while stepping over conduit and fell backwards. The employee put his hands and arms out to catch himself, and his right hand was caught in the unguarded moving chain and sprocket of the adjacent transfer line conveyor chain and sprocket drive belt for the roller conveyor. The employee suffered a right hand fingertip partial amputation and was hospitalized.
Incident on Nov 13, 2017: Employee's fingertip is amputated when caught in chain
At 9:50 a.m. on November 13, 2017, Employee #1 was using a hand control feed switch to cycle and feed a positioned stack of veneer into the feed position using the drive chains. As Employee #1's right hand was holding the switch, she reached forward with her left hand to clear a piece of scrap veneer. Her glove became caught in the chain, which pulled her left hand into the machine. Employee #1's left pinky finger was amputated, which she was hospitalized for her injury.
Incident on Jul 13, 2017: Employee crushes hand in rack gear drive on plywood press
At approximately 7:45 a.m. on July 13, 2017, Employee #1 had just finished his shift and was going to clean up around a plywood press before he left. A coworker, who just began his shift, started the Plywood Press Number 2, when he heard someone yell. Employee #1 was cleaning up beside the plywood lift, when he slipped and put his hand out that went into a rack gear track. The rack gear drive caught Employee #1's left hand and crushed it. His hand was mangled with multiple fractures and one of his fingers was later surgically amputated. The rack gear drive operated the lift to the plywood press. Employee #1 was transported to a medical center, where he underwent surgical procedures and received post-operative treatment on his crushed and managed hand. hand.
No citations from this inspection.
Inspection 341869253 OPENED OCT 26, 2016Closed
Referral · Partial · Safety · 729 employees at the site · Closed Jul 13, 2017
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Chapman site logged 9 recordable injuries or illnesses among about 328 workers: 2.7 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 103 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Coastal Forest Products - Plywood Mill
Chapman · 2021
328
9
3
2.7
3.9
Coastal Forest Products - Lumber Mill
Chapman · 2021
81
4
3
4.5
4.2
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 6 reports on file.
Feb 21, 2020, Chapman: Amputation · amputations · fingertip(s)
An employee was walking on a shanking conveyor when he slipped while stepping over a piece of conduit. His hand went into a chain and sprocket on the roller conveyor, resulting in an amputation to his right ring fingertip. The chain and sprocket were unguarded at the time of the incident.
Nov 13, 2017, Chapman: Amputation · amputations · fingertip(s)
An employee was attempting to free a stuck piece of veneer from rollers when her right little finger was caught in the roller bed drive chain, amputating her fingertip.
An employee was cleaning around the non-operator side of a press charger when the employee slipped and his left hand landed on a gear rack, fracturing four fingers. The gear rack was unguarded at the time.
An employee was freeing a jammed wood product (veneer panel plywood) from a saw line workstation. While freeing the jammed plywood from the grader bin, the operator pinned/pinched his arm between a piece of metal angle iron (under a load) and the metal cross member causing a puncture wound on his right arm below the bicep.
Aug 26, 2016, Chapman: Hospitalization · multiple traumatic injuries and disorders, n.e.c. · hand(s), unspecified
An employee was adjusting the feed roller to the spec saw. The employee's watchband was caught in the keyway and the employee's hand was caught between a driveshaft and the feed roller resulting in tendon damage to the left hand and a laceration that required hospitalization.
An employee was conducting maintenance on a cylinder when the weld broke on an attachment plate used to lift a steel beam. The beam came down on and broke the employee's left forearm.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) Use. The employer shall ensure that the employee uses appropriate personal protective equipment unless the employer shows that the employee temporarily and briefly declined to use personal protective equipment when, under rare and extraordinary circumstances, it was the employee's professional judgment that in the specific instance its use would have prevented the delivery of health care or public safety services or would have posed an increased hazard to the safety of the worker or co-worker. When the employee makes this judgement, the circumstances shall be investigated and documented in order to determine whether changes can be instituted to prevent such occurances in the future.
(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.