Since 1996, OSHA inspectors have visited Computer Components Corporation in Pennsylvania 9 times.
The most recent inspection opened on Sep 12, 2023 as a planned inspection, in Philadelphia.
In all, OSHA issued 31 citation items: 17 serious and 14 other-than-serious.
The proposed penalties came to $46,329; today they stand at $30,283, 35% less.
The rule cited most here is 1910.303 (electrical equipment, general requirements), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Computer Components Corporation averages $9,020 across 3 cited inspections.
Computer Components Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
285employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Computer Components Corporation and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Philadelphia site logged 4 recordable injuries or illnesses among about 75 workers: 4.7 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 99 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Computer Components Corporation
Philadelphia · 2025
75
4
4
4.7
3.6
Company 1
Philadelphia · 2023
70
7
0
9.3
3.6
Computer Components Corp.
Philadelphia · 2022
80
7
0
8.4
3.6
Computer Components
Philadelphia · 2017
84
8
1
8.5
3.6
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(2) Scheduled monitoring option. (i) The employer shall perform initial monitoring to determine the 8-hour TWA exposure for each employee on the basis of a sufficient number of personal breathing zone air samples to accurately characterize full shift exposure on each shift, for each job classification, in each work area. Where an employer does representative sampling instead of sampling all employees in order to meet this requirement, the employer shall sample the employee(s) expected to have the highest chromium (VI) exposures.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(c)(2)
(2) Minimum separation. There shall be no open flame or spark producing equipment in any spraying area nor within 20 feet thereof, unless separated by a partition.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.