Continental Structural Plastics, Inc.: OSHA inspections and violations
Carey, Ohio · All Other Plastics Product Manufacturing · NAICS 326199
23inspections
20citation items
$116,768current penalties
Oct 23, 2020last inspection
Since 2006, OSHA inspectors have visited Continental Structural Plastics, Inc. in Ohio 23 times.
The most recent inspection opened on Oct 23, 2020 after a complaint, in North Baltimore.
In all, OSHA issued 20 citation items: 17 serious, 2 repeat and 1 other-than-serious.
The proposed penalties came to $168,439; today they stand at $116,768, 31% less.
The rule cited most here is 1910.147 (lockout/tagout), 8 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Continental Structural Plastics, Inc. averages $9,670 across 7 cited inspections.
1 inspection on this page followed a fatal incident.
Continental Structural Plastics, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
6 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Continental Structural Plastics, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jun 13, 2018: Employee catches two fingers in filter system while clearing
A 10:15 a.m. on June 13, 2018, an employee was cleaning a Ronningen-Petter DCF filter system located at the sheet molding compound machine #2. The employee was trying to clear a jam and had his fingers inside the ball valve while a coworker was holding the filter purge button. The coworker released the button and the ball valve closed, partially amputating the employee's two fingers from his right hand. The employee was hospitalized.
Incident on Apr 19, 2017: Employee's fingertip is amputated in rollers
At 9:30 a.m. on April 19, 2017, an employee was working to unclog a tube of a roller machine. As the employee removed the machine's guard and placed his hand near the rollers of the machine, his fingers became entangled in the moving parts. The tip of one of his fingers was amputated.
No citations from this inspection.
Inspection 342149176 OPENED FEB 28, 2017Closed
Referral · Partial · Safety · 270 employees at the site · Closed Sep 5, 2017
Incident on Feb 21, 2017: Employee was struck by forklift
At 10:00 a.m. on February 21, 2017, an employee had just completed inspecting parts at a table behind press #23. The employee left the area and started walking toward the entrance to the shipping department. The employee walking from the shipping department was struck by the right front tire of a high-low fork truck. The injured employee sustained a crushing injury to his right foot and needed reconstructive surgery to repair the damage to his right elbow resulting in a four night hospitalization.
Incident on Aug 13, 2007: Employee's fingertips are amputated by press
At approximately 12:30 a.m. on August 13, 2007, Employee #1 was operating Willia ms-White Moline 750 ton press. She reached in to remove a part. As soon as she r emoved her foot from the foot pedal, it activated again, causing the lifters to go down, amputating the tips of the third and fourth fingers on her right hand. Employee #1 was hospitalized. The slide guarders of the press failed to operate properly in that the foot pedal should be pressed once to activate the lifters u p and another signal sent from a safety stand located approximately 5 ft away to activate the lifters to go down. The equipment was set up so both the activatio ns happened with the foot pedal, once to activate the lifters up and secondly to remove the foot from the lifters while it goes back down. Management knew of th is but did not inform the employee.
Incident on Aug 16, 2006 (fatal): Employee is caught in automated drill and killed
At approximately 4:30 p.m. on August 16, 2006, Employee #1, an engineer, was per forming machine adjustments on the drills of a P251 LH Fender Inner Drill Fixtur e made by Bel-Kur, Incorporated. The employee was working inside the factory alo ne, and had crawled through a 25.5-in. by 22.5-in. hole in the barrier guard, in to the confinement of the machining process. He had not locked out the machine b efore entering. The machine accidentally started up and the employee was crushed in a secondary automated drilling operation. Employee #1 was found by coworkers and pronounced dead by the local coroner on site. It was determined that contri buting factors to the accident were: that the employee was not protected by any additional sensing devices that would have prevented the accidental start-up of machinery within the barrier guarding, and that the machine had not been locked out. The employee had worked for the company approximately thirty years and was trained in lockout tagout.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Carey site logged 1 recordable injury or illness among about 871 workers: 0.1 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Continental Structural Plastics - Carey
Carey · 2021
871
1
0
0.1
2.6
Continental Structural Plastics
North Baltimore · 2020
337
6
1
1.4
2.6
Continental Structural Plastics - Conneaut
Conneaut · 2020
227
4
0
1.7
2.6
Continental Structural Plastics, Van Wert, Ohio
Van Wert · 2020
90
0
0
0.0
1.6
Continental Structural Plastics
Carey · 2018
954
19
1
1.6
2.6
Included with any plan: 14 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
Nov 13, 2020, Carey: Hospitalization · fractures · hip(s)
An employee tripped while stepping off a platform. He fell about 6 inches, landing on his hip (and on a radio in his pocket). His hip was broken and he was hospitalized.
Jun 13, 2018, Van Wert: Amputation · amputations · finger(s), fingernail(s), n.e.c.
While cleaning out the A-side actuator with another employee, the valve closed on the injured employee's right middle and index fingers resulting in amputation of the fingers.
Nov 17, 2017, Van Wert: Amputation · amputations · fingertip(s)
An employee was repairing a tear in an SMC machine. The dam that holds back pigment was lifted and then fell on the employee's right middle finger, amputating his fingertip.
On April 19, 2017, an employee was attempting to clear a plugged fiberglass tube from the sheet molding compound machine's glass cutter. While pulling the fiberglass through the tube, the employee's right middle fingertip struck the rotating cotton roller and was amputated. The machine was unguarded at the time of the incident.
Feb 14, 2017, Conneaut: Hospitalization · fractures · elbow(s)
An employee entered a walkway that was near a portable dust collection system. The system created a blind spot, and a forklift struck the employee, who suffered a fractured right elbow and crushed right foot.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.120 · Hazardous waste operations and emergency response
29 CFR 1910.120(e)(1)(ii)
(ii) Employees shall not be permitted to participate in or supervise field activities until they have been trained to a level required by their job function and responsibility.
29 CFR 1910.120(g)(3)(i)
(3) Personal protective equipment selection. (i) Personal protective equipment (PPE) shall be selected and used which will protect employees from the hazards and potential hazards they are likely to encounter as identified during the site characterization and analysis.
(10) The employer shall ensure that workplace labels or other forms of warning are legible, in English, and prominently displayed on the container, or readily available in the work area throughout each work shift. Employers having employees who speak other languages may add the information in their language to the material presented, as long as the information is presented in English as well.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.