OSHA SearchOSHA records by employer

Cross's Crashes, Inc.: OSHA inspections and violations

Idaho Falls, Idaho · General Automotive Repair · NAICS 811111

2inspections
6citation items
$8,000current penalties
Jun 15, 2016last inspection

Cross's Crashes, Inc. has 2 OSHA inspections on record in Idaho, the first in 2015.

OSHA's last visit started on Jun 15, 2016 to follow up on an earlier case, in Idaho Falls.

Across those inspections OSHA issued 6 citation items: 6 serious.

OSHA proposed $9,800 in penalties. After settlements and reviews the total is $8,000, down 18%.

Most often, OSHA cited 1910.178, forklifts and other powered industrial trucks (3 items).

For context, across all repair and personal services employers the median penalty per cited inspection since 2015 is $1,200. Cross's Crashes, Inc. averages $8,000 over 1 cited inspection in that time.

1 inspection on this page followed a fatal incident.

Cross's Crashes, Inc.: OSHA citation items per year, 2015 to 2016
Citation items per year, by inspection date.

Idaho · latest 90 days of OSHA records

62employers cited

Get notified the morning OSHA posts each new citation in Idaho: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Idaho

Checking a subcontractor, a client or your own company? Watch Cross's Crashes, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341574168 OPENED JUN 15, 2016Closed

Follow-up · Partial · Safety · 2 employees at the site · Closed Jun 17, 2016

1218 East Iona Road, Idaho Falls, ID 83401 · Recyclable Material Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 340206895 OPENED JAN 26, 2015Closed

Fatality or catastrophe · Partial · Safety · 4 employees at the site · Closed May 1, 2015

1218 E. Iona Rd., Idaho Falls, ID 83401 · General Automotive Repair · OSHA's record · Phone and website on Google Maps

Incident on Jan 26, 2015 (fatal): Employee is crushed and killed when a van falls on him.

At approximately 11:00 a.m. on January 26, 2015, an employee was sent out to the salvage yard to take the plate off of the rear axle on an Econoline Van. Two hours later he was found dead, crushed under the back end of the van. The van was held up by two sets of tire rims, positioned approximately mid-way between the two front tires and rear axle, on either side of the van. Each set had the bottom rim flat to the ground, with the second rim set up on its side, inside the bottom rim. No chocks were used. Evidence indicated that the employee was removing the entire rear axle when the van shifted and fell on him. him.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
OSH Act Section 5(a)(1) · General Duty Clause
Serious$2,800$2,000Apr 3, 2015Final
Citation 1, item 1b
29 CFR 1910.178(a)(6) · Forklifts and other powered industrial trucks
Serious$0$0Apr 3, 2015Final
Citation 1, item 1c
29 CFR 1910.178(l)(6) · Forklifts and other powered industrial trucks
Serious$0$0Apr 3, 2015Final
Citation 1, item 1d
29 CFR 1910.178(q)(7) · Forklifts and other powered industrial trucks
Serious$0$0Apr 3, 2015Final
Citation 1, item 2a
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$7,000$6,000Apr 3, 2015Final
Citation 1, item 2b
29 CFR 1910.147(c)(4) · Lockout/tagout
Serious$0$0Apr 3, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(a)(6)

(6) The user shall see that all nameplates and markings are in place and are maintained in a legible condition.

29 CFR 1910.178(l)(6)

(6) Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.

OSH Act Section 5 · General Duty Clause

Other general automotive repair employers in Idaho

Alert subscribers get notified of each newly cited employer in Idaho the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.