Inspection 343904231 OPENED APR 3, 2019Closed
1011 N. Industrial Road, Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
D-J Engineering, Inc. has 7 OSHA inspections on record in Kansas, the first in 2007.
OSHA's last visit started on Apr 3, 2019 to follow up on an earlier case, in Augusta.
Across those inspections OSHA issued 7 citation items: 3 serious and 4 other-than-serious.
OSHA proposed $23,541 in penalties. After settlements and reviews the total is $13,896, down 41%.
Most often, OSHA cited 1910.179, overhead and gantry cranes (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. D-J Engineering, Inc. averages $5,820 over 1 cited inspection in that time.
It reported 1 severe injury to OSHA since 2015.
Want to know if OSHA cites D-J Engineering, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this companyInspection history
Inspection 343637203 OPENED DEC 4, 2018Closed
1011 N. Industrial Road, Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Inspection 343002515 OPENED MAR 8, 2018Closed
1011 N. Industrial Road, Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.179(n)(3)(iv) · Overhead and gantry cranes |
Serious | $11,641 | $5,820 | Apr 12, 2018 | Final |
Inspection 338990096 OPENED APR 4, 2013Closed
1002 Industrial Road, Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.107(g)(4) · Spray painting and finishing |
Other-than-serious | $0 | $0 | May 17, 2013 | Final |
Inspection 338982101 OPENED MAR 26, 2013Closed
219 W. Sixth Ave., Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 OSH Act Section 5(a)(1) · General Duty Clause |
Serious | $2,550 | $1,275 | Apr 5, 2013 | Final |
| Citation 1, item 2 29 CFR 1910.147(c)(4)(i) · Lockout/tagout |
Other-than-serious | $2,550 | $1,275 | Apr 5, 2013 | Final |
| Citation 1, item 3a 29 CFR 1910.179(j)(2) · Overhead and gantry cranes |
Other-than-serious | $2,550 | $1,275 | Apr 5, 2013 | Final |
| Citation 1, item 3b 29 CFR 1910.184(d) · Slings |
Other-than-serious | $0 | $0 | Apr 5, 2013 | Final |
| Citation 1, item 4 29 CFR 1910.212(a)(4) · Machine guarding |
Serious | $4,250 | $4,250 | Apr 5, 2013 | Final |
Inspection 314025008 OPENED MAR 30, 2010Closed
219 W. 6th Ave., Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Inspection 310777545 OPENED JUN 12, 2007Closed
219 W. Sixth Ave, Augusta, KS 67010 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 19, 2020, Augusta: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee was attempting to load a steel plate onto a work table for a water jet to cut when the piece shifted, and a finger on the employee's left hand was caught in a pinch point and amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.107 · Spray painting and finishing
29 CFR 1910.107(g)(4)
(4) Clothing storage. Spray finishing employees' clothing shall not be left on the premises overnight unless kept in metal lockers.
29 CFR 1910.147 · Lockout/tagout
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.179 · Overhead and gantry cranes
29 CFR 1910.179(j)(2)
(2) Frequent inspection. The following items shall be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections. All deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:
29 CFR 1910.184 · Slings
29 CFR 1910.212 · Machine guarding
OSH Act Section 5 · General Duty Clause
Other other aircraft parts and auxiliary equipment manufacturing employers in Kansas
- Boeing Wichita · 2 citations · $16,550
- Figeac Aero North America, Inc. Wichita · 1 citation · $4,988
- Orizon Aerostructures, LLC Chanute · 2 citations · $4,823
- Quik Tek Machining, LLC. Wichita · 7 citations · $22,545
- Spirit Aerosystems, Inc Wichita · 48 citations · $558,695
- Akrofire, LLC Lenexa · 2 citations · $3,972
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.