Dekalb Molded Plastics: OSHA inspections and violations
Butler, Indiana · Plastics Material and Resin Manufacturing · NAICS 325211
8inspections
33citation items
$3,830current penalties
Mar 25, 2021last inspection
Dekalb Molded Plastics has 8 OSHA inspections on record in Indiana, the first in 1980.
OSHA's last visit started on Mar 25, 2021 after a complaint, in Butler.
Across those inspections OSHA issued 33 citation items: 7 serious and 26 other-than-serious.
OSHA proposed $12,980 in penalties. After settlements and reviews the total is $3,830, down 70%.
Most often, OSHA cited 1910.303, electrical equipment, general requirements (6 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Dekalb Molded Plastics averages $225 over 2 cited inspections in that time.
1 inspection on this page followed a fatal incident.
Dekalb Molded Plastics also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Indiana · latest 90 days of OSHA records
79employers cited
Get notified the morning OSHA posts each new citation in Indiana: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Butler site logged 3 recordable injuries or illnesses among about 55 workers: 5.9 per 100 full-time workers, against a median of 1.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
DeKALB Molded Plastics
Butler · 2020
55
3
0
5.9
1.1
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
(5) Transportation. (i) Chemical manufacturers, importers, or distributors shall ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked in accordance with this section in a manner which does not conflict with the requirements of the Hazardous Materials Transportation Act (49 U.S.C. 5101 et seq.) and regulations issued under that Act by the Department of Transportation (49 CFR subtitle B).
(2) The employee alarm shall be capable of being perceived above ambient noise or light levels by all employees in the affected portions of the workplace. Tactile devices may be used to alert those employees who would not otherwise be able to recognize the audible or visual alarm.
Alert subscribers get notified of each newly cited employer in Indiana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.