Edgewell Personal Care, LLC: OSHA inspections and violations
Milford, Connecticut · Cutlery and Handtool Manufacturing · NAICS 332212
3inspections
3citation items
$24,184current penalties
Feb 3, 2021last inspection
Since 2018, OSHA inspectors have visited Edgewell Personal Care, LLC in Connecticut 3 times.
The most recent inspection opened on Feb 3, 2021 on a referral, in Milford.
In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.
The proposed penalties came to $40,240; today they stand at $24,184, 40% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Edgewell Personal Care, LLC averages $8,061 across 3 cited inspections.
Edgewell Personal Care, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Connecticut · latest 90 days of OSHA records
88employers cited
Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Edgewell Personal Care, LLC and get notified the morning OSHA posts a new citation for it.
OSHA records show Edgewell Personal Care, LLC at 2 sites in 2 states. Together they've had 5 inspections and $66,011 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jan 28, 2021: Employee sustains partial amputation and avulsion when finge
At 8:50 p.m. on January 28, 2021, an employee, working as a material handler, was feeding back blister cards into the pick and feed rack on the heat and seal section of an Alloyd straight line packaging machine. After dropping a stack of cards into the pick and feed system enclosure, he attempted to retrieve the cards by inserting his right hand through the opening where the blister cares are typically fed. The pick and feed system, which has suction cups attached to metal bars, was still moving and pinched the worker's right middle finger between two components. He sustained partial amputation and avulsion of the right middle finger about halfway down the nail. The employee was treated without hospitalization.
Incident on Aug 13, 2020: Employee amputates fingertip between plate and bracket
At 6:45 a.m. on August 13, 2020, an employee was performing maintenance on a metal extrusion plate which which measured approximately 2.5 inches by 34.5 inches by 36 inches wide and weighed approximately 650 pounds. The plate was sitting upright on a work bench attached by a bolt to a triangular support bracket to prevent the plate from tipping over during maintenance. The employee was facing the broad side of the mold plate using a brass rod and hammer to tap out inserts from the mold. In order to reach inserts higher up on the mold, the employee needed to reposition the mold. The employee placed her right hand on the support bracket at the base of the mold and pushed away to slide the mold plate across the work bench. Friction between the bottom of the mold plate and the top of the work bench caused the mold plate to begin rotate on the bolt away from the employee. The employee had her fingers placed in openings on the support bracket grabbing the bracket and applying force as the plate rotated against the bracket. The employee caught her right ring fingertip in a nip point crushing it and resulting in an amputation and medical treatment. The employee was not hospitalized.
Incident on Oct 12, 2018: Employee crushes hand when struck by swinging plate
At 10:20 a.m. on October 12, 2018, an employee was transporting a cavity plate with an overhead hoist toward a central work table, struck the backing plate, and fell to the ground. The employee tried to catch the backing plate which was not secured to the table and crushed his right hand. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Milford site logged 3 recordable injuries or illnesses among about 475 workers: 0.6 per 100 full-time workers, against a median of 3.2 for its industry. Those cases cost 24 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Edgewell Personal care
Milford · 2024
475
3
3
0.6
3.2
Included with any plan: 2 more yearly logs from these sites, back to 2022, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was transferring a steel mold plate from one work bench to another using an overhead hoist when the mold plate already on the work table began to fall/tip over. As he tried to catch the plate, it crushed his right hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.
Other cutlery and handtool manufacturing employers in Connecticut
Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.