OSHA has inspected Engineered Building Products, Inc. 2 times in Connecticut since 1998.
The latest one began on Jun 14, 2023 after a complaint, in Bloomfield.
Those inspections ended with 8 citation items: 4 serious and 4 other-than-serious.
Penalties were first proposed at $18,752 and now stand at $10,000, 47% lower after settlements or reviews.
Spray painting and finishing comes up most often in these citations: 2 items under 1910.107.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Engineered Building Products, Inc. averages $10,000 (1 cited inspection).
Engineered Building Products, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Connecticut · latest 90 days of OSHA records
86employers cited
Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Engineered Building Products, Inc. and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bloomfield site logged 1 recordable injury or illness among about 25 workers: 4.4 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 11 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Engineered Building Products, Inc.
Bloomfield · 2025
25
1
1
4.4
3.6
Included with any plan: 8 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
29 CFR 1910.107(d)(2)
(2) General. All spraying areas shall be provided with mechanical ventilation adequate to remove flammable vapors, mists, or powders to a safe location and to confine and control combustible residues so that life is not endangered. Mechanical ventilation shall be kept in operation at all times while spraying operations are being conducted and for a sufficient time thereafter to allow vapors from drying coated articles and drying finishing material residue to be exhausted.
Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.