Bellefontaine, Ohio · Other Electronic Component Manufacturing · NAICS 334419
5inspections
12citation items
$24,654current penalties
Jun 28, 2019last inspection
OSHA has inspected Ewh Spectrum LLC 5 times in Ohio since 2013.
The latest one began on Jun 28, 2019 on a referral, in Bellefontaine.
Those inspections ended with 12 citation items: 10 serious and 2 other-than-serious.
Penalties were first proposed at $45,454 and now stand at $24,654, 46% lower after settlements or reviews.
Noise comes up most often in these citations: 5 items under 1910.95.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Ewh Spectrum LLC averages $2,785 (3 cited inspections).
Ewh Spectrum LLC also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Jun 24, 2019: Employee's finger is amputated by pneumatic press
At approximately 05:50 a.m. on June 24, 2019, an employee was running the #8 Ampoelectric pneumatic press to add terminals to the end of wire harnesses. The mechanism for automatically pushing through the harnesses had stopped working, so the employee attempted to push them through by left hand. At some point, the employee accidentally hit the foot pedal, activating the press, with their index finger inside of the point of operation. The press was not guarded and the employee sustained a partial amputation of the left index fingertip but was not hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Bellefontaine site logged 1 recordable injury or illness among about 40 workers: 2.1 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 160 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Ewh Spectrum LLC
Bellefontaine · 2021
40
1
1
2.1
2.7
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Feb 22, 2021, Bellefontaine: Hospitalization · fractures · hip(s)
On February 22, 2021, an employee was walking in her work station when she bumped into some boxes. She fell, suffering a broken hip.
May 20, 2020, Bellefontaine: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
An employee was counting wire harnesses when the employee tripped over a wire harness that was hanging over the edge of a barrel. The employee fell to the concrete ground on their right side and suffered a collapsed lung, requiring hospitalization.
An employee was running terminals through a press machine when a terminal became jammed in the press. He was attempting to unjam the press when it was activated via the foot pedal. The press then partially amputated his left index finger.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(4)(iii)
(iii) An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.