Hall Manufacturing, LLC: OSHA inspections and violations
North Little Rock, Arkansas · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
3inspections
17citation items
$31,932current penalties
Jul 28, 2021last inspection
OSHA has inspected Hall Manufacturing, LLC 3 times in Arkansas since 2011.
The latest one began on Jul 28, 2021 on a referral, in North Little Rock.
Those inspections ended with 17 citation items: 14 serious and 3 other-than-serious.
Penalties were first proposed at $21,903 and still stand at $31,932.
Spray painting and finishing comes up most often in these citations: 5 items under 1910.107.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Hall Manufacturing, LLC averages $12,182 (1 cited inspection).
Hall Manufacturing, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
18employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
Incident on Jul 26, 2021: Employee?s left index finger is pinched by tubing and sustai
At 7:30 a.m. on July 26, 2021, an employee was placing tubing on a workbench when the tubing shifted and slid onto the employee's left hand. The left index finger was pinched and crushed between the tubing and a piece of channel on the workbench, resulting in amputation of the fingertip above the fingernail bed. The employee was treated without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the North Little Rock site logged 2 recordable injuries or illnesses among about 69 workers: 2.9 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
The Hall Group
North Little Rock · 2025
69
2
0
2.9
2.7
Hall Manufacturing Inc., LLC
North Little Rock · 2019
59
5
4
8.1
2.7
Included with any plan: 5 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Sep 27, 2022, North Little Rock: Hospitalization · fractures · multiple upper extremities locations, n.e.c.
An employee was using a plasma cutter to cut a hole in a 55-gallon paint drum, using a circular steel plate as a guide. As he pierced the lid of the drum, pressure ejected the lid and the steel plate upwards. The lid struck the employee's left arm and hand. He suffered acute carpal tunnel syndrome in the arm, compartment syndrome in the hand, and fractures to the arm, wrist, three metacarpal bones, and the thumb.
Jul 26, 2021, North Little Rock: Amputation · amputations · fingertip(s)
At about 7:40 a.m. on July 26, 2021, an employee was settling a bundle of four pieces of square tubing onto a workbench when the tubing shifted and slid onto his left hand and index finger. The finger was pinched and crushed between the tubing and a piece of channel on the workbench, causing an amputation to the fingertip above the nailbed.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(iv) Handling liquids at point of final use. (a) Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall be kept in covered containers when not actually in use.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(2) Minimum separation. There shall be no open flame or spark producing equipment in any spraying area nor within 20 feet thereof, unless separated by a partition.
Alert subscribers get notified of each newly cited employer in Arkansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.