OSHA SearchOSHA records by employer

High Concrete Group LLC: OSHA inspections and violations

Springboro, Ohio · Other Concrete Product Manufacturing · NAICS 327390

3inspections
4citation items
$14,192current penalties
Sep 24, 2021last inspection

Since 2010, OSHA inspectors have visited High Concrete Group LLC in Ohio 3 times.

The most recent inspection opened on Sep 24, 2021 on a referral, in Springboro.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $37,347; today they stand at $14,192, 62% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. High Concrete Group LLC averages $7,096 across 2 cited inspections.

High Concrete Group LLC also files yearly injury logs with OSHA, summarized below.

It reported 3 severe injuries to OSHA since 2015.

High Concrete Group LLC: OSHA citation items per year, 2010 to 2021
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

265employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch High Concrete Group LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345542526 OPENED SEP 24, 2021Closed

Referral · Partial · Safety · 80 employees at the site · Closed Feb 2, 2022

95 Mound Park Drive, Springboro, OH 45066 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Sep 21, 2021: Employee amputates three fingers while unclogging concrete l

At 4:30 p.m. on September 21, 2021, an employee working as a production supervisor for a concrete manufacturer was helping two coworkers clear a concrete clog in a line. The line ran from the scale to the mixer. The employee followed procedures. He hit the rubber boot over the pipe with a hammer and then removed the boot and pushed with a stick to free the clog. The employee then stuck his hand inside to verify there was no additional concrete clogging the line. One of the coworkers pushed the button to close the valve as the control panel indicated the line was clear and ready to operate. The employee still had his hand in the line causing him to catch three fingers in the valve. The employee received medical treatment without hospitalization for amputates to three fingers.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$13,653$8,192Dec 17, 2021Final

Inspection 341477529 OPENED MAY 16, 2016Closed

Referral · Partial · Safety · 60 employees at the site · Closed Oct 5, 2016

95 Mound Drive, Springboro, OH 45066 · Structural Steel and Precast Concrete Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$8,730$6,000Aug 29, 2016Final
Citation 1, item 2
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$7,482$0Aug 29, 2016Final
Citation 1, item 3
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$7,482$0Aug 29, 2016Final

Inspection 314776410 OPENED AUG 18, 2010Closed

Planned · Partial · Safety · 202 employees at the site · Closed Aug 19, 2010

95 Mound Rd., Springboro, OH 45066 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Springboro site logged 2 recordable injuries or illnesses among about 75 workers: 2.7 per 100 full-time workers, against a median of 3.4 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
High Concrete Group LLC - Springboro
Springboro · 2025
75 202.73.4

Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.

Sep 21, 2021, Springboro: Amputation · amputations · fingertip(s)

An employee was checking to see what was causing a mixer chute to jam when the valve engaged and caught the employee's fingers. Two fingertips on their left hand were amputated.

Sep 1, 2020, Springboro: Hospitalization · puncture wounds, except gunshot wounds · hand(s), except finger(s)

An employee was using a stressing jack when hydraulic fluid blew through a pin hole in the hydraulic hose of the jack and entered his left-hand palm.

May 9, 2016, Springboro: Amputation · amputations · fingertip(s)

The employee was using a table saw to rip off a small section of a 12 foot long 2x2 when the employee caught his left hand in the blade, amputating the tips of three fingers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other other concrete product manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.