Highway Products Inc: OSHA inspections and violations
White City, Oregon · Other Metal Container Manufacturing · NAICS 332439
17inspections
44citation items
$13,792current penalties
Feb 27, 2025last inspection
Highway Products Inc has 17 OSHA inspections on record in Oregon, the first in 1989.
OSHA's last visit started on Feb 27, 2025 after a complaint, in White City.
Across those inspections OSHA issued 44 citation items: 22 serious, 2 repeat and 20 other-than-serious.
OSHA proposed $13,792 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.147, lockout/tagout (6 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Highway Products Inc averages $2,847 over 4 cited inspections in that time.
Highway Products Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
Incident on Jul 19, 2021: Employee is struck by broken die while operating punch machi
At 10:30 a.m. on July 19, 2021, Employee #1 was operating a punch machine when the die broke into pieces and struck him. Employee #1 sustained a puncture wound and was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the White City site logged 6 recordable injuries or illnesses among about 133 workers: 4.6 per 100 full-time workers, against a median of 2.8 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Highway Products
White City · 2018
133
6
0
4.6
2.8
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) Fire resistance. Storage cabinets shall be designed and constructed to limit the internal temperature to not more than 325 °F. when subjected to a 10-minute fire test using the standard time-temperature curve as set forth in Standard Methods of Fire Tests of Building Construction and Materials, NFPA 251-1969, which is incorporated by reference as specified in § 1910.6. All joints and seams shall remain tight and the door shall remain securely closed during the fire test. Cabinets shall be labeled in conspicuous lettering, “Flammable—Keep Fire Away.”
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.