Since 2016, OSHA inspectors have visited Homeyer Precision Manufacturing in Missouri 4 times.
The most recent inspection opened on Mar 12, 2020 to follow up on an earlier case, in Marthasville.
In all, OSHA issued 22 citation items: 20 serious and 2 other-than-serious.
The proposed penalties came to $63,048; today they stand at $32,334, 49% less.
The rule cited most here is 1910.147 (lockout/tagout), 8 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Homeyer Precision Manufacturing averages $16,167 across 2 cited inspections.
1 inspection on this page followed a fatal incident.
Homeyer Precision Manufacturing also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Missouri · latest 90 days of OSHA records
126employers cited
Get notified the morning OSHA posts each new citation in Missouri: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Homeyer Precision Manufacturing and get notified the morning OSHA posts a new citation for it.
Incident on Mar 29, 2017: Employee catches hand in disc sander and amputates fingers
At 9:00 p.m. on March 29, 2017, an employee was grinding a part with a 20 inch disc sander. The guard was not properly adjusted, allowing the part to flip and the employee's fingers becoming caught between the part and grinding wheel. The employee's index and middle fingers of left hand were ground down to bone. to bone.
No citations from this inspection.
Inspection 341447860 OPENED MAY 4, 2016Closed
Fatality or catastrophe · Complete · Safety · 60 employees at the site · Closed Sep 23, 2016
Incident on May 3, 2016 (fatal): Employee is electrocuted when repairing 480 volt cord
At 2:45 p.m. on May 3, 2016, an employee was apparently walking while holding onto a 480 volt SO Cord that was energized. He had partially disassembled the plug prior to this through the use of an allen wrench and screw driver. There were no witnesses. The coroner responded to the scene following the accident. The coroner determined that the employee was walking towards a fixed flight of stairs. The employee reached for the metal stair railing with his left hand while holding on to the energized, flexible cord with his right. The employee was electrocuted and killed. Burn marks were found on the palms of both hands. hands.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Marthasville site logged 1 recordable injury or illness among about 34 workers: 3.2 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Homeyer Precision Manufacturing
Marthasville · 2025
34
1
0
3.2
2.7
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) General requirements. Employers shall select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)(b)
(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Missouri the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.