Houck Construction Materials Inc has 3 OSHA inspections on record in Oregon, the first in 1989.
OSHA's last visit started on May 18, 2026 after a complaint, in Salem.
Across those inspections OSHA issued 9 citation items: 6 serious and 3 other-than-serious.
OSHA proposed $2,717 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Houck Construction Materials Inc averages $1,457 over 1 cited inspection in that time.
Houck Construction Materials Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
386employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Houck Construction Materials Inc and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Salem site logged 0 recordable injuries or illnesses among about 19 workers: 0.0 per 100 full-time workers, against a median of 2.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Houck Construction Materials Inc
Salem · 2025
19
0
0
0.0
2.2
Houck Construction Materials
Salem · 2021
24
3
0
16.2
2.2
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(6)
(6) Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.