OSHA SearchOSHA records by employer

Hueber L.L.C.: OSHA inspections and violations

Creston, Illinois · Other Animal Food Manufacturing · NAICS 311119

5inspections
16citation items
$50,000current penalties
Nov 28, 2023last inspection

Since 2010, OSHA inspectors have visited Hueber L.L.C. in Illinois 5 times.

The most recent inspection opened on Nov 28, 2023 on a referral, in Beecher.

In all, OSHA issued 16 citation items: 13 serious and 3 other-than-serious.

The proposed penalties came to $68,173; today they stand at $50,000, 27% less.

The rule cited most here is 1910.272 (grain handling facilities), 4 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Hueber L.L.C. averages $24,000 across 2 cited inspections.

1 inspection on this page followed a fatal incident.

It reported 1 severe injury to OSHA since 2015.

Hueber L.L.C.: OSHA citation items per year, 2010 to 2023
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

426employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch Hueber L.L.C. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347126393 OPENED NOV 28, 2023Closed

Referral · Partial · Safety · 90 employees at the site · Closed Feb 8, 2024

2106 E. Corning Road, Beecher, IL 60401 · Other Animal Food Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 345422240 OPENED JUL 15, 2021Closed

Complaint · Partial · Safety · 14 employees at the site · Closed Jan 3, 2022

105 Dixon Avenue, Rock Falls, IL 61071 · Other Animal Food Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(d)(1) · Walking-working surfaces
Serious$7,510$4,750Nov 22, 2021Final
Citation 1, item 2a
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$7,510$4,750Nov 22, 2021Final
Citation 1, item 2b
29 CFR 1910.28(b)(3)(iv) · Fall protection in general industry
Serious$0$0Nov 22, 2021Final
Citation 1, item 3
29 CFR 1910.30(a)(1) · Training requirements
Serious$7,510$4,750Nov 22, 2021Final
Citation 1, item 4a
29 CFR 1910.146(c)(4) · Permit-required confined spaces
Serious$7,510$4,750Nov 22, 2021Final
Citation 1, item 4b
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$0$0Nov 22, 2021Final
Citation 1, item 4c
29 CFR 1910.272(g)(1) · Grain handling facilities
Serious$0$0Nov 22, 2021Final
Citation 2, item 1
29 CFR 1910.28(b)(11)(ii) · Fall protection in general industry
Other-than-serious$0$0Nov 22, 2021Final
Citation 2, item 2
29 CFR 1910.178(l)(1)(ii) · Forklifts and other powered industrial trucks
Other-than-serious$0$0Nov 22, 2021Final

Inspection 345103469 OPENED JAN 15, 2021Closed

Fatality or catastrophe · Partial · Safety · 80 employees at the site · Closed Aug 30, 2021

1138 Backbone Rd., Tampico, IL 61283 · Grain and Field Bean Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Incident on Jan 14, 2021 (fatal): Employee is electrocuted when feed auger contacted live 7,80

At 6:45 p.m. on January 14, 2021, an employee was standing at a tractor-trailer's operating an overhead feed auger. Coworker #1 was standing about 5 - 10 feet south of the employee in between the barn and the trailer. The auger was raised and rotated over the barn towards the northeast rooftop saddle at the trailer's rear end. Coworker #1 walked towards the driver door watching the auger as it was lowering. At that time a sudden flash and sparking occurred when the auger's tip contacted the southern 7,800 volt power line. The employee was electrocuted and fell to the ground killing him. Coworker #1 approached the employee whose left hand was had been amputated. Coworker #1 attempted to extract the employee while avoiding contact with the truck. Once Coworker #1 made contact with the body, an electric shock knocked him down to the ground. Coworker #1 observed the trailer was on fire and stood up, stepped away disoriented and touched the grain wagon which was energized receiving another electric shock. At that point, Coworker #1 left to try to find help as he heard a distinctive noise when the truck tires blew. Coworker #1 sat down and watched as the power went out. At that point, the decided to enter the truck's cab to retrieve his phone and wallets. He called Coworker #2 to inform him about the accident because he knew that a bystander had already called 911. While on the call, Coworker #1 attempted to unhook truck from the trailer. He turned off truck's motor, disconnected airlines, and attempted to restart it, but could not. Coworker #1 went back to the employee, picked him up and carried him inside the barn where CPR was performed by a bystander. EMS arrived and attended to the employee prior to removing him for transport by ambulance. When EMS arrived, the rear end of the trailer was still on fire and could not be extinguished until the power line was deenergized, which was performed by the power company around 8:00 p.m.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1 Serious$9,557$7,672May 28, 2021Final
Citation 1, item 2
29 CFR 1910.333(c)(3)(iii)(a) · Working near live electrical parts
Serious$13,653$13,653May 28, 2021Final
Citation 1, item 3
29 CFR 1910.333(c)(4)(ii) · Working near live electrical parts
Serious$9,557$7,675May 28, 2021Final
Citation 2, item 1
29 CFR 1904.29(a) · Injury and illness log
Other-than-serious$1,366$0May 28, 2021Final

Inspection 339626194 OPENED MAR 10, 2014Closed

Complaint · Complete · Safety · 7 employees at the site · Closed Apr 25, 2014

100 N. 1st St., Holcomb, IL 61043 · Other Animal Food Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.272(j)(1) · Grain handling facilities
Serious$2,000$1,000Apr 4, 2014Final
Citation 1, item 1b
29 CFR 1910.272(j)(4) · Grain handling facilities
Serious$0$0Apr 4, 2014Final
Citation 1, item 2
29 CFR 1910.272(j)(2)(ii) · Grain handling facilities
Serious$2,000$1,000Apr 4, 2014Final

Inspection 314040239 OPENED NOV 12, 2010Closed

Planned · Complete · Safety · 17 employees at the site · Closed Jan 12, 2011

110 South Main Street, Creston, IL 60113 · Grain and Field Bean Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 22, 2023, Beecher: Hospitalization · fractures · thigh(s)

On November 22, 2023, a grain truck driver entered the tank and used a broom to sweep out the tank. Their foot became caught in the auger, resulting in a laceration to their ankle. The employee used their opposite leg to pull their ankle free and sustained a broken femur.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.29 · Injury and illness log

29 CFR 1904.29(a)

(a) Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300-A is the Summary of Work-Related Injuries and Illnesses, and the OSHA 301 form is called the Injury and Illness Incident Report.

29 CFR 1910.146 · Permit-required confined spaces

29 CFR 1910.146(c)(4)

(4) If the employer decides that its employees will enter permit spaces, the employer shall develop and implement a written permit space program that complies with this section. The written program shall be available for inspection by employees and their authorized representatives.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.272 · Grain handling facilities

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.30 · Training requirements

29 CFR 1910.332 · Training

29 CFR 1910.333 · Working near live electrical parts

Other other animal food manufacturing employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.