Lear Corporation, Inc.: OSHA inspections and violations
Huron, Ohio · Other Motor Vehicle Parts Manufacturing · NAICS 336399
27inspections
34citation items
$43,282current penalties
Sep 18, 2020last inspection
Since 1997, OSHA inspectors have visited Lear Corporation, Inc. in Ohio 27 times.
The most recent inspection opened on Sep 18, 2020 on a referral, in Hebron.
In all, OSHA issued 34 citation items: 24 serious and 10 other-than-serious.
The proposed penalties came to $58,166; today they stand at $43,282, 26% less.
The rule cited most here is 1910.212 (machine guarding), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Lear Corporation, Inc. averages $8,675 across 1 cited inspection.
Lear Corporation, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
OSHA records show Lear Corporation, Inc. at 35 sites in 4 states. Together they've had 143 inspections and $328,677 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 35 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Sep 11, 2020: Employee incurs multiple injuries after fall into moving con
At 7:25 a.m. on September 11, 2020, an employee was cleaning out heated molds on the automated foam press conveyor line. A tool (pick) was dropped into the line by the employee. It landed on the floor below the line. The employee attempted to obtain the tool that was dropped. In doing so, the employee made multiple attempts to lean/reach into the automated conveyor line between the molds to obtain the tool. In the final attempt, the employee dove between the molds to better reach the tool and was unable to get back out before the fixed barrier gate. As a result, the employee was pulled by the conveyor line. The employee was able to roll out of the gap and landed in a heated mold (155 degrees Fahrenheit). At this point, a coworker pulled the E-stop, stopping the line. The employee was caught between the heated mold and the stationary steel blowout arm. The employee was pinned in this position for 9 minutes, until the blowout arm was cut off and removed, thereby allowing the employee to be pulled from the line by EMS personnel. The employee was hospitalized to treat fractured ribs, contusions, and first and second-degree burns covering a large amount of his body.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1910.132(a) · Personal protective equipment, general requirements
Other-than-serious
$11,566
$8,675
Dec 4, 2020
Final
Inspection 340783281 OPENED JUL 17, 2015Closed
Complaint · Partial · Health · 90 employees at the site · Closed Oct 13, 2015
Incident on Apr 23, 2006: Employee suffers amputation when hand caught in rotary valve
At approximately 6:00 a.m. on April 13, 2006, Employee #1 was working in the res in reclaim area of a plastic injection molding plant which makes automotive inte rior parts, SIC 3999. She was processing a mixture of carpet fluff and resin, se parating granular resin from carpet fluff. The carpet fluff was pulled apart by hand and resin, along with residual carpet fibers, was transported by a vacuum a ir system to a cyclone separator. Carpet fluff and resin separated by the cyclon e were collected in hoppers. The carpet fluff collection hopper was equipped wit h a Kongskilde RF 20 rotary valve where it discharged into an open top card boar d box. Employee #1 was knocking down the pile of carpet fluff accumulation in th e collection box, an activity that placed her hand directly under, and within in ches of, the rotating vanes of the valve. Her gloved hand was caught in the rota ry valve and her hand and arm were pulled into the valve. Employee #1 sustained extensive tissue damage and amputation and was hospitalized. The investigation r evealed that this was the first time Employee #1 was assigned to that task. An e mployee with experience in the operation showed her how to do the job, but was n ot a witness to the accident.
Incident on Dec 1, 2004: Employee's head pinched by carpet puller
On December 1, 2004, an employee, who was working in a carpet Bay number 4, reac hed to curl the carpet up to a position so the carpet would be more horizontal t o allow the carpet grabber to easily grip the carpet and pull it onto the shuttl e table. The employee's head was pinched between the carpet puller device and th e steel frame of the bay. The employee suffered head trauma, including hearing l oss, bone fractures, and vision impairment, as a result of the accident.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Hebron site logged 1 recordable injury or illness among about 113 workers: 1.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Lear Corporation - Hebron
Hebron · 2025
113
1
0
1.0
2.6
Renosol Seating, LLC - Hebron
Hebron · 2019
102
3
1
2.5
2.6
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was operating a forklift down an aisle to return an empty hopper. The hopper shifted on the forks, causing the cable that connected the container and the forklift to snap. The employee's finger was struck by the metal cable and he sustained a partial amputation of the left middle finger.
Sep 11, 2020, Hebron: Hospitalization · fractures and burns · multiple body parts, unspecified
An employee was retrieving a tool that had fallen into a foam conveyor line. The employee fell into the conveyor line and was stuck between the heated blowout manifold and the conveyor, suffering burns and broken ribs.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(5) Negative initial determination. Where a determination, conducted under paragraphs (d) (2) and (3) of this section is made that no employee is exposed to airborne concentrations of lead at or above the action level, the employer shall make a written record of such determination. The record shall include at least the information specified in paragraph (d)(3) of this section and shall also include the date of determination, location within the worksite, and the name number of each employee monitored.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.