Lex Products, LLC: OSHA inspections and violations
Shelton, Connecticut · All Other Miscellaneous Electrical Equipment and Component Manufacturing · NAICS 335999
4inspections
27citation items
$49,388current penalties
Feb 27, 2023last inspection
Lex Products, LLC has 4 OSHA inspections on record in Connecticut, the first in 2011.
OSHA's last visit started on Feb 27, 2023 after a complaint, in Shelton.
Across those inspections OSHA issued 27 citation items: 19 serious and 8 other-than-serious.
OSHA proposed $82,917 in penalties. After settlements and reviews the total is $49,388, down 40%.
Most often, OSHA cited 1910.134, respiratory protection (7 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Lex Products, LLC averages $9,496 over 2 cited inspections in that time.
Lex Products, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Connecticut · latest 90 days of OSHA records
86employers cited
Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.
Incident on Nov 2, 2021: End of worker's finger is amputated when mold table retracts
At 9:30 a.m. on November 2, 2021, an employee was working as a machine operator for a wholesaler of electronic parts and equipment. He was operating a Yuhdak model YHS-100-C-25 plastic injection molding machine (serial number TNI905-038). It ran on a three-phase 208-volt supply and required 125 amps. In operation, part, but not all, of the machine was guarded by light curtains. As the production coordinator of the overmold area noted, the light curtains applied only to the closing of the guard on the mold. The light curtains and mold guard were not interlocked with the machine's retractable table. The light curtains could stop the mold guard, but the mold table was still free to retract to the left. The production manager and supervisor stated that employees had been trained not to place their hands under the mold guard, and that signs saying "Keep hands away" had been posted on the front of the mold guard. At the time of the incident, the employee was making an electronic cable. The mold had opened inside the guard, which stayed shut. The retractable table was to the right. The employee had his right-hand pointer or index finger in a large hole on the table, where the injection of plastic would take place. Using his left hand, he reached up under the mold guard to the top of the mold. This was not normal for him, but he wanted to speed up the removal of the part, or shot. The table moved toward the left, taking about two to three seconds. The employee's right index finger was still in the hole on the table. The finger was amputated to the first joint. The employee was treated without hospitalization. The employee had been trained that to remove a part from the mold, he needed to wait for the table to move to the left. Only then could he remove the part. If there was a jam, the operator was stop the mold, push both buttons, and check to see what happened. The employer had trained the operators not to place their hands under the guard when the mold was up.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Shelton site logged 5 recordable injuries or illnesses among about 94 workers: 5.2 per 100 full-time workers, against a median of 1.5 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Forest Parkway
Shelton · 2025
94
5
1
5.2
1.5
15 Progress Drive
Shelton · 2020
98
9
0
8.5
1.5
Included with any plan: 11 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Nov 2, 2021, Shelton: Amputation · amputations · fingertip(s)
An employee was operating an overmold machine. The machine's table moved while the employee's right index finger was in a hole for the mold, causing the amputation of the fingertip at the first joint.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) What do I need to do to complete the OSHA 301 Incident Report? You must complete an OSHA 301 Incident Report form, or an equivalent form, for each recordable injury or illness entered on the OSHA 300 Log.
(iii) “No Smoking” signs in large letters on contrasting color background shall be conspicuously posted at all powder coating areas and powder storage rooms.
29 CFR 1910.107(l)(7)(v)
(v) The electrical equipment shall be so interlocked with the ventilation system that the equipment cannot be operated unless the ventilation fans are in operation.
Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.