Liberty Pumps Inc.: OSHA inspections and violations
Bergen, New York · Pump and Compressor Manufacturing · NAICS 333911
9inspections
33citation items
$40,140current penalties
Mar 3, 2016last inspection
Since 1976, OSHA inspectors have visited Liberty Pumps Inc. in New York 9 times.
The most recent inspection opened on Mar 3, 2016 after a complaint, in Bergen.
In all, OSHA issued 33 citation items: 13 serious, 1 willful and 19 other-than-serious.
The proposed penalties came to $73,460; today they stand at $40,140, 45% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Liberty Pumps Inc. averages $16,000 across 1 cited inspection.
Liberty Pumps Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
362employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bergen site logged 14 recordable injuries or illnesses among about 351 workers: 4.4 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 9 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Liberty Pumps
Bergen · 2025
351
14
3
4.4
1.9
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(8) Sources of ignition. In addition to the previous restrictions of this paragraph, the following shall apply: There shall be no smoking or open flames in the areas used for fueling, servicing fuel systems for internal combustion engines, receiving or dispensing of flammable liquids. Conspicuous and legible signs prohibiting smoking shall be posted within sight of the customer being served. The motors of all equipment being fueled shall be shut off during the fueling operation.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.