OSHA SearchOSHA records by employer

Madstad Engineering, Inc.: OSHA inspections and violations

Dade City, Florida · Aluminum Sheet, Plate, and Foil Manufacturing · NAICS 331315

1inspections
11citation items
$2,400current penalties
May 14, 2015last inspection

OSHA inspectors have visited Madstad Engineering, Inc. in Florida one time.

It opened on May 14, 2015 after a complaint, in Dade City.

In all, OSHA issued 11 citation items: 2 serious and 9 other-than-serious.

The proposed penalties came to $4,000; today they stand at $2,400, 40% less.

The rule cited most here is 1910.107 (spray painting and finishing), 4 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Madstad Engineering, Inc. averages $2,400 across 1 cited inspection.

Madstad Engineering, Inc.: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Madstad Engineering, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 340631068 OPENED MAY 14, 2015Closed

Complaint · Partial · Health · 11 employees at the site · Closed Oct 8, 2015

20721 Hwy 301, Dade City, FL 33523 · Aluminum Sheet, Plate, and Foil Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.178(l)(1)(i) · Forklifts and other powered industrial trucks
 Serious$1,200$720Aug 20, 2015Final
Citation 1, item 2
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$2,800$1,680Aug 20, 2015Final
Citation 2, item 1
29 CFR 1910.107(b)(5)(i) · Spray painting and finishing
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 2
29 CFR 1910.107(b)(9) · Spray painting and finishing
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 3
29 CFR 1910.107(d)(3) · Spray painting and finishing
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 4
29 CFR 1910.107(h)(12) · Spray painting and finishing
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 5
29 CFR 1910.134(c)(1) · Respiratory protection
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 6
29 CFR 1910.134(e)(1) · Respiratory protection
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 7
29 CFR 1910.134(f)(1) · Respiratory protection
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 8
29 CFR 1910.1200(e)(1) · Hazard communication
 Other-than-serious$0$0Aug 20, 2015Final
Citation 2, item 9
29 CFR 1910.1200(h)(1) · Hazard communication
 Other-than-serious$0$0Aug 20, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.107 · Spray painting and finishing

29 CFR 1910.107(b)(5)(i)

(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.

29 CFR 1910.107(b)(9)

(9) Cleaning. Spray booths shall be so installed that all portions are readily accessible for cleaning. A clear space of not less than 3 feet on all sides shall be kept free from storage or combustible construction.

29 CFR 1910.107(d)(3)

(3) Independent exhaust. Each spray booth shall have an independent exhaust duct system discharging to the exterior of the building, except that multiple cabinet spray booths in which identical spray finishing material is used with a combined frontal area of not more than 18 square feet may have a common exhaust. If more than one fan serves one booth, all fans shall be so interconnected that one fan cannot operate without all fans being operated.

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.212 · Machine guarding

Other aluminum sheet, plate, and foil manufacturing employers in Florida

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.