OSHA SearchOSHA records by employer

Marks Cabinetry Services Inc: OSHA inspections and violations

Tampa, Florida · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
4citation items
$10,000current penalties
Feb 21, 2019last inspection

OSHA has inspected Marks Cabinetry Services Inc once in Florida.

The inspection began on Feb 21, 2019 on a referral, in Tampa.

That inspection ended with 4 citation items: 3 serious and 1 other-than-serious.

Penalties were first proposed at $14,853 and now stand at $10,000, 33% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 2 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Marks Cabinetry Services Inc averages $10,000 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Marks Cabinetry Services Inc: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

326employers cited

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Marks Cabinetry Services Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343798229 OPENED FEB 21, 2019Closed

Referral · Partial · Safety · 11 employees at the site · Closed Aug 30, 2019

9842 Currie Davis Dr., Tampa, FL 33619 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Feb 12, 2019: Employee amputates two fingers when struck against table saw

At 2:00 p.m. on February 12, 2019, an employee was operating a table saw while cutting laminate material and his finger came into contact with the rotating saw blade, amputating his pinky and ring finger. The employee was hospitalized. hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$6,763$4,500May 2, 2019Final
Citation 1, item 2a
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$6,763$4,500May 2, 2019Final
Citation 1, item 2b
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0May 2, 2019Final
Citation 2, item 1
29 CFR 1904.7(b)(4) · General recording criteria
Other-than-serious$1,327$1,000May 2, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Feb 12, 2019, Tampa: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee amputated his pinky and ring fingers while cutting laminate on a table saw.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.7 · General recording criteria

29 CFR 1904.7(b)(4)

(4) How do I record a work-related injury or illness that results in restricted work or job transfer? When an injury or illness involves restricted work or job transfer but does not involve death or days away from work, you must record the injury or illness on the OSHA 300 Log by placing a check mark in the space for job transfer or restriction and an entry of the number of restricted or transferred days in the restricted workdays column.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other wood kitchen cabinet and countertop manufacturing employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.