Maryland Metals Processing, Inc.: OSHA inspections and violations
Baltimore, Maryland · Fabricated Structural Metal Manufacturing · NAICS 332312
10inspections
55citation items
$20,170current penalties
Jun 15, 2016last inspection
Maryland Metals Processing, Inc. has 10 OSHA inspections on record in Maryland, the first in 1991.
OSHA's last visit started on Jun 15, 2016 after a fatality or catastrophe, in Sparrows Point.
Across those inspections OSHA issued 55 citation items: 36 serious and 19 other-than-serious.
OSHA proposed $41,235 in penalties. After settlements and reviews the total is $20,170, down 51%.
Most often, OSHA cited 1910.305, electrical wiring methods (8 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Maryland Metals Processing, Inc. averages $8,535 over 1 cited inspection in that time.
2 inspections on this page followed a fatal incident.
Maryland Metals Processing, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Maryland · latest 90 days of OSHA records
187employers cited
3 of them in the same industry
Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Maryland Metals Processing, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jun 15, 2016 (fatal): Employee is crushed as the steel coiled around the recoiler,
At approximately 2:45 p.m. on June 15, 2016, an employees accessed the steel recoil area of the polishing operation where a 48-in. wide, 0.030 gauge, steel coil was being fed at a rate of 50-70 feet per minute. The area was unguarded between the lower tension roller and the recoil roller, a length of 89 inches from the lower tension roller located 30 inches from the floor and the ingoing nip point on the recoil roller located 74 inches above the floor. The employee was attempting to insert paper from a roller in between coils of steel that was one continuous sheet as it was recoiled onto a recoiler machine. The employee had his hands and then his arms got caught in the recoiler which pulled the rest of his body up down to his waist into the recoiler before the recoiler could be stopped by a coworker. The employee was killed.
Incident on Oct 2, 2001: Employee pinned against bundle of steel
On October 2, 2001, Employee #1, assistant operator, was operating a P&H 15-ton overhead crane with a 10-ton Bushman Sheet Lifter attachment to lift bundles of sheet steel and store them in another section of the plant warehouse. A bundle o f steel was to be placed on top of the stack where two previous bundles had been placed. The bundle of steel had 24 sheets, 48 in. wide, 120 in. long, and weigh ed 9,000 lbs. The bundle was picked up using the Sheet Lifter and was brought do wn the middle of the plant to just before the stack where it was to be placed. E mployee #1 stood on the west side of the stack on the floor and tried to reach u p and turn the wheel-handle on the Sheet Lifter that would release the L-shaped grips holding the bundle of steel sheets. Due to the height of the stacked bundl es of sheet steel and the location of the wheel-handle he could barely reach and turn it. Employee #1 stepped up and stood inside of the eye of the steel coil a nd leaned over and onto the top of the bundle of steel. Employee #1 reached up w ith his right hand to turn the wheel-handle. His left hand was braced on the ste el next to the crane controls. While reaching for the wheel-handle his left hand accidentally flicked the middle switch on the controls causing the crane and bu ndle to move towards him. As the bundle of steel moved towards him, he flicked t he middle switch in the opposite direction to try and reverse the movement. Whil e doing that he was pushing down on the bundle so it would not hit him in his mi d-section. The bundle did strike him in his hip/groin area and pinned him agains t the steel coil then bounced back and landed on top of the stacked bundles. He jumped from the coil and landed on his feet for a few seconds before falling to the floor on his right side. Employee #1 was hospitalized for severe bruising to the hips, thighs, groin, penis, and testicles.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 50104 A
Serious
$3,700
$1,000
Feb 28, 2002
Closed
Inspection 303852172 OPENED AUG 17, 2000Closed
Accident · Partial · Safety · 50 employees at the site · Closed Nov 21, 2000
Incident on Aug 16, 2000: Employee's leg amputated when caught in machine roller
Employee #1 climbed the free rollers of a Grindmaster machine to retrieve a left over piece of grit paper that had not been removed by the operator. He was on th e roller when the foreman placed a 4 ft by 8 ft stainless steel sheet through th e Grindmaster. The sheet passed through the second machine before it rode the ne xt section of the free roller prior to going through the third machine, which ha d two rollers, one on top of the other. Employee #1 was descending when he slipp ed and one foot became caught between the free rollers while the other was pulle d into the in-feed rollers. He suffered crushing injuries and was transported to the hospital, where his leg was surgically amputated below the knee.
Incident on Mar 27, 1991 (fatal): Employee killed when struck by recoiling machine
On March 27, 1991, Employee #1 was operating a recoiling machine. When he had co mpleted a coil, he stopped the machine and was getting ready to band the coil fo r shipping. While he was standing next to the 22,000 lb coil, the drive shaft fo r the coiler broke. The load fell onto Employee #1, killing him. It was noted du ring the investigation that the failure could not have been foreseen.
No citations from this inspection.
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Baltimore site logged 1 recordable injury or illness among about 38 workers: 2.7 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Maryland Metals Processing Inc.
Baltimore · 2024
38
1
1
2.7
2.3
Included with any plan: 6 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(iv) Handling liquids at point of final use. (a) Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall be kept in covered containers when not actually in use.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
29 CFR 1910.110(f)(6)(ii)
(ii) Containers shall be in a suitable enclosure or otherwise protected against tampering.
(5) Transportation. (i) Chemical manufacturers, importers, or distributors shall ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked in accordance with this section in a manner which does not conflict with the requirements of the Hazardous Materials Transportation Act (49 U.S.C. 5101 et seq.) and regulations issued under that Act by the Department of Transportation (49 CFR subtitle B).
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.