Mayco Manufacturing, LLC: OSHA inspections and violations
Birmingham, Alabama · Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) · NAICS 331492
2inspections
5citation items
$10,376current penalties
Feb 13, 2019last inspection
Since 2015, OSHA inspectors have visited Mayco Manufacturing, LLC in Alabama 2 times.
The most recent inspection opened on Feb 13, 2019 after a complaint, in Birmingham.
In all, OSHA issued 5 citation items: 2 serious and 3 other-than-serious.
The proposed penalties came to $16,876; today they stand at $10,376, 39% less.
The rule cited most here is 1910.178 (forklifts and other powered industrial trucks), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Mayco Manufacturing, LLC averages $5,188 across 2 cited inspections.
Mayco Manufacturing, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Referral · Partial · Safety · 89 employees at the site · Closed Jul 27, 2015
18 West Oxmoor Rd, Birmingham, AL 35209 · Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) · OSHA's record · Phone and website on Google Maps
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Birmingham site logged 4 recordable injuries or illnesses among about 115 workers: 2.5 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 8 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Mayco Industries - Birmingham Main Facility
Birmingham · 2025
115
4
1
2.5
2.9
Mayco Manufacturing LLC
Birmingham · 2022
115
11
0
8.5
2.9
Mayco Manufacturing, LLC
Birmingham · 2018
93
4
0
3.5
2.9
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Aug 30, 2023, Birmingham: Amputation · amputations · fingertip(s)
An employee was operating a table saw to cut pieces of lumber measuring 2x2x36 inches. The blade contacted the employee's left thumb, cutting half of the distal phalange bone and amputating the thumb tip along the bottom of the fingernail.
An employee was pouring molten lead into molds. When lead solidifies, the lead is removed from the mold using an eye bolt and chain attached to a bolt that is poured into the lead cylinder. The employee attempted to lift the lead cylinder from the mold, but the mold was stuck to the lead. The employee attempted to clean the surface of the floor underneath the mold using his hand while the mold…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(a)(4)
(4) Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.
29 CFR 1910.178(l)(4)(iii)
(iii) An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.
29 CFR 1910.178(p)(1)
(p) Operation of the truck. (1) If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.