OSHA has inspected Menard, Inc. 17 times in Iowa since 1995.
The latest one began on Apr 19, 2021 on a referral, in Shelby.
Those inspections ended with 38 citation items: 18 serious, 2 repeat and 18 other-than-serious.
Penalties were first proposed at $118,457 and now stand at $94,986, 20% lower after settlements or reviews.
Forklifts and other powered industrial trucks comes up most often in these citations: 5 items under 1910.178.
How that compares: the median penalty per cited inspection for retail employers since 2015 is $1,750, and Menard, Inc. averages $9,944 (7 cited inspections).
1 inspection on this page followed a fatal incident.
Menard, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
69employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
OSHA records show Menard, Inc. at 93 sites in 7 states. Together they've had 202 inspections and $727,969 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 93 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Apr 12, 2021: Employee sustains several hand injuries when pulled into con
At 10:30 p.m. on April 12, 2021, an employee was working as a machinery maintenance technician for a warehouse and storage facility. The employee was preparing to perform a visual inspection of a conveyor belt on the Line 13 Brake Meter Belt. The employee noticed that there was a large piece of plastic under the belt. She employee turned off the machine, but did not apply her lock to the lockout switch. The employee then went under the conveyor to scrape the belt and remove the piece of plastic with her putty knife. While the employee was under the belt scraping, a coworker returned to the line and started the machine. The coworker started the line three times, and on the third time, the employee's putty knife was caught in the rollers of the belt pulling her hand into the rollers. The employee tore the tendons in her right hand, crushed her middle and ring fingers, and cut her pinkie finger requiring hospitalization.
Incident on Sep 15, 2019: Employee fractures leg in fall from pallet
At 9:10 a.m. on September 15, 2019, an employee was unjamming a pallet on a gravity storage rack and was stepping on materials located on another pallet on the floor to move the pallet above. Once the pallet was unjammed, the employee stepped off the materials and lost his footing and fell. The employee was hospitalized to treat a fractured tibia and fibula.
Incident on Jan 23, 2019: Employee amputates finger when caught between tug machine an
At 10:50 p.m. on January 23, 2019, an employee was working for a chain of big box home improvement stores. He was working in a warehouse. He had noticed a coworker moving an electric-powered tow tractor off a tow stop and took the time to help. The employee attempted to physically move the electric-powered tow tractor by lifting it up and off the tow stop. The coworker was simultaneously attempting to move the tow tractor with a forklift. The tow tractor was lifted up enough for the employee to wedge his finger underneath, between the tow tractor and the two stop. The tow tractor came down on the finger. The employee sustained the amputation of the index finger on his right hand. He was hospitalized.
No citations from this inspection.
Inspection 342967635 OPENED FEB 21, 2018Closed
Referral · Partial · Safety · 230 employees at the site · Closed May 28, 2020
Incident on Feb 11, 2018: Employee slips and falls from elevated forklift tines and fr
At 5:30 p.m. on February 11, 2018, an employee and a coworker were trying to clear out a jam of lumber with the fork tines of a Yale Lift Truck. The employee was standing on the fork times and was raised up approximately 14 feet from the ground. The employee slipped and fell to the concrete floor, fracturing his L1 vertebra and was hospitalized.
Incident on May 12, 2017: Employee cuts hand with compound miter saw
At 2:30 p.m. on May 12, 2017, an employee was cutting lumber to length for a customer with a compound miter saw. The employee was moving a board into position to be cut, when his left had made contact with the rotating saw blade that was coasting to a stop. The compound miter saw blade cut the employees left hand.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 88.4 - CODE OF IOWA (2017)
Other-than-serious
$1,625
$1,000
Jun 13, 2017
Final
Inspection 341518645 OPENED MAY 31, 2016Closed
Referral · Partial · Safety · 240 employees at the site · Closed Dec 12, 2016
Incident on Jun 21, 1995 (fatal): Electric shock & fall - contact with energized parts
A sales worker was replacing a light bulb in an overhead, hanging lighting fixtu re located 5.7 meters above a concrete tiled floor. He was working from a ladder that was propped up against a wooden beam. As he was changing the bulb, he fell off the ladder to the floor. He died of massive head injuries received as a res ult of the fall. Witnesses stated that it appeared as if the employee received a n electric shock just before falling. They saw his arm start to tremble as if he were getting shocked, and then he fell. (Subsequent tests of the fixture did sh ow the potential for electric shock.)
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Davenport site logged 29 recordable injuries or illnesses among about 262 workers: 17.1 per 100 full-time workers, against a median of 4.5 for its industry. Those cases cost 20 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Davenport IA - 3315
Davenport · 2022
262
29
5
17.1
4.5
Council Bluffs IA - 3082
Council Bluffs · 2022
247
7
5
4.1
4.5
Sioux City IA - 3065
Sioux City · 2022
232
18
6
11.2
4.5
Marion Iowa IA - 3020
Marion · 2022
232
23
9
15.1
4.5
Dubuque IA - 3057
Dubuque · 2022
212
13
5
9.5
4.5
Mason City IA - 3094
Mason City · 2022
178
8
2
6.5
4.5
West Burlington IA - 3338
West Burlington · 2022
175
11
3
9.1
4.5
Spencer IA - 3202
Spencer · 2022
167
12
6
10.4
4.5
Included with any plan: 94 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(3) How quickly must each injury or illness be recorded? You must enter each recordable injury or illness on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness has occurred.
(c) Exposure control—(1) Exposure Control Plan. (i) Each employer having an employee(s) with occupational exposure as defined by paragraph (b) of this section shall establish a written Exposure Control Plan designed to eliminate or minimize employee exposure.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
29 CFR 1910.110(f)(2)(i)
(2) General. (i) Containers in storage shall be located so as to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons.
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.