Since 1997, OSHA inspectors have visited Metal Culverts, Inc. in Illinois 4 times.
The most recent inspection opened on Jun 12, 2025 on a referral, in Havana.
In all, OSHA issued 18 citation items: 9 serious, 2 repeat and 7 other-than-serious.
The proposed penalties came to $267,093; today they stand at $105,110, 61% less.
The rule cited most here is 1910.147 (lockout/tagout), 6 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Metal Culverts, Inc. averages $47,305 across 2 cited inspections.
1 inspection on this page followed a fatal incident.
Metal Culverts, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
426employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Metal Culverts, Inc. at 8 sites in 5 states. Together they've had 30 inspections and $177,189 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 8 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on May 13, 1997 (fatal): Employee killed when load falls off forklift
At approximately 1:30 p.m. on May 13, 1997, Employee #1 and a coworker were usin g an industrial truck to load a bundle of eighteen 15 in. diameter steel culvert s and six 12 in. diameter steel culverts onto a flatbed semi-trailer. Employee # 1 told his coworker to lift the new bundle off another bundle of ten 18 in. diam eter steel culverts that was already on the trailer so he could place an additio nal binder around the lower bundle. The coworker used the same industrial truck as before to lift the top bundle. The forklift had been modified by attaching a 94 in. fork extension onto one of the truck's 48 in. forks to accommodate the 90 in. wide bundles. After the coworker lifted the first bundle to the lift's maxi mum height of 150 in., he tilted the load back to the maximum rearward tilt of 1 4 degrees. Employee #1 attached a chain to the semi-trailer on the side of the t railer with the lift and then threw the chain across the trailer to the side opp osite the lift. Employee #1 walked to the other side of the trailer and began to bind down the load. The coworker felt it was taking Employee #1 longer than usu al to bind down the lower bundle. He was beginning to step off the lift when he saw the raised bundle falling off the forks toward the opposite side of the trai ler. It struck Employee #1, who was crushed and killed.
29 CFR 1904.8 · Recording criteria for needlestick and sharps injuries
Other-than-serious
$3,000
$3,000
Oct 10, 1997
Closed
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Havana site logged 2 recordable injuries or illnesses among about 21 workers: 10.5 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Havana site
Havana · 2025
21
2
2
10.5
3.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jun 11, 2025, Havana: Amputation · amputations involving bone loss · other finger(s) n.e.c.
A riveting machine cycled while an employee was setting a part and it crushed the employee's right index finger between the punch and the culvert, resulting in an amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(3) How do I certify the annual summary? A company executive must certify that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete.
29 CFR 1904.8 · Recording criteria for needlestick and sharps injuries
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.