Peterson Contractors Inc.: OSHA inspections and violations
Waterloo, Iowa · Highway, Street, and Bridge Construction · NAICS 237310
29inspections
44citation items
$69,141current penalties
Jun 17, 2025last inspection
Peterson Contractors Inc. has 29 OSHA inspections on record in Iowa, the first in 1984.
OSHA's last visit started on Jun 17, 2025 on a referral, in Iowa City.
Across those inspections OSHA issued 44 citation items: 18 serious, 1 repeat and 25 other-than-serious.
OSHA proposed $169,075 in penalties. After settlements and reviews the total is $69,141, down 59%.
Most often, OSHA cited 1926.651, excavations (6 items).
For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Peterson Contractors Inc. averages $8,274 over 5 cited inspections in that time.
3 inspections on this page followed a fatal incident.
Peterson Contractors Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
66employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on Mar 4, 2024 (fatal): Employee dies from chest, abdomen injuries when struck by tr
At 10:00 a.m. on March 4, 2024, an employee working for an infrastructure contractor was picking up a truck from a dealership after service work had been performed. The employee had completed a walk around inspection and was about to fill out the logbook. He realized he did not have a pen and returned to the building to get the pen. The truck started rolling backwards and the employee jumped on the running board to try to stop the vehicle. The employee was struck by the truck and pushed against a fence post. The employee died from serious injuries to his chest and abdomen.
No citations from this inspection.
Inspection 344087556 OPENED JUN 17, 2019Closed
Referral · Partial · Safety · 6 employees at the site · Closed Aug 8, 2019
Incident on Jun 11, 2019: Employee fractures ribs and shoulder blade when caught betwe
At 8:00 a.m. on June 11, 2019, Employee #1 and coworkers were attempting to remove water that had accumulated the previous night in their excavation. Employee #1 and a coworker were in the excavation near a concrete intake and attempting to install a pipe to remove water with a sump pump. As the John Deere 250 G Excavator was back dragging rock for the small pipe, Employee #1 placed himself between the concrete intake and the 4-foot excavator bucket. The excavator operator did not see Employee #1 behind the bucket. Employee #1 became caught and pinned between the bucket and the intake. Employee #1 was transported to the hospital, where he was admitted for treatment of multiple fractured ribs and a fractured scapula/shoulder blade.
Incident on Jun 3, 2019: Employee handling equipment amputates thumb
At 9:00 a.m. on June 3, 2019, Employee #1, employed by a bridge and highway construction company, was working at a bridge construction project that involved use of a crane. He and coworkers added a section of boom to the crane. As the employee was pulling the pin on the gantry, he had his thumb on the inside of the rim of the pin. The weight of the cables moved the boom slightly and pinched his thumb in the hole. The end of the thumb was amputated. The employee received medical treatment for the partial amputation but was not hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1a
29 CFR 1926.1404(d)(1)(ii) · Assembly/Disassembly—general requirements (applies to all assembly and disassembly operations)
Other-than-serious
$13,260
$13,260
Jul 31, 2019
Final
Citation 1, item 1b
29 CFR 1926.1404(h)(7) · Assembly/Disassembly—general requirements (applies to all assembly and disassembly operations)
Other-than-serious
$0
$0
Jul 31, 2019
Final
Inspection 343915419 OPENED APR 8, 2019Closed
Planned · Complete · Health · 15 employees at the site · Closed Apr 30, 2019
Incident on Sep 15, 2018: Employee fractures both legs when pulled under fender by doz
At 9:30 a.m. on September 15, 2018, an employee was operating a D6 dozer. The employee stopped the dozer and exited the cab to stand on the track while he gave a truck driver directions. Failing to put the dozer in neutral gear, the dozer backed up and pulled the employee in under the fender and pinned his legs. The employee received fractures to both legs and was hospitalized.
Incident on Oct 21, 2017: Employee is directing drivers at job site and is run over by
At 6:30 a.m. on October 21, 2017, Employee #1 and Coworker #1, employed by a construction company, were working at a jobsite. Employee #1 was checking in the trucks delivering dirt to the site and alerting the truck drivers to ground conditions, that is, whether the trucks would be driving over dry soil or wet soil. Coworker #1 was operating a semi truck-trailer. Employee #1, after conferring with Coworker #1, stepped off Coworker #1's truck. Coworker #1 put the truck into gear and drove forward. The truck's driver-side rear dual wheels/tires ran over and crushed Employee #1's legs. Emergency services were called, and Employee #1 was transported to the hospital. She was admitted and treated for fractures and crushing injuries to both legs.
Incident on Sep 17, 2003 (fatal): Employee electrocuted when forklift contacts power line
On September 17, 2003, Employee #1 and a coworker were working on the replacemen t of an old bridge. The bridge had been torn down but water had accummulated and needed to be pumped out before new construction could begin. The employees were using an Gehl rough-terrain forklift, model 883, to place a hydraulic submersib le 8 in. pump in the water. The pump was attached to a 20 ft 10 in. long by 1/2 in. wide wire rope with an eye on one end that was placed on one of the tines of the fork. The forklift was positioning the pump when it contacted a 7,200 volt overhead power line. Employee #1, who was on the right side of the forklift, was electrocuted. He was pronounced dead at the scene.
Incident on Feb 18, 1994 (fatal): Employee drowns in river when causeway shears off
Employee #1, operating a D-7 dozer with full cab, was constructing a causeway in to a river; the causeway would be used to place riprap around bridge piers. The causeway measured about 160 ft long and 20 ft 6 in wide. It sheared off and Empl oyee #1 and the dozer sank 25 ft to the bottom of the river. Employee #1 drowned .
Incident on Mar 12, 1986: Employee injured by falling piece of frozen earth
Employee #1 was installing a 60 in. sewer pipe in an approximately 20 ft deep tr ench. An approximately 2 ft by 2 ft by 2 ft piece of frozen earth broke loose fr om the wall and fell into the trench, striking Employee #1 on the leg between hi s hip and his knee. He was hospitalized with a broken leg.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Reinbeck site logged 7 recordable injuries or illnesses among about 534 workers: 1.0 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 218 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Peterson Cotractors, Inc.
Reinbeck · 2025
534
7
3
1.0
2.2
Peterson Contractors Inc
Reinbeck · 2022
492
11
1
1.7
2.2
Peterson Contractors Inc.
Reinbeck · 2020
506
21
3
3.0
2.2
Included with any plan: 4 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.
(b) Lifelines shall be secured above the point of operation to an anchorage or structural member capable of supporting a minimum dead weight of 5,400 pounds.
(a) Employees working over or near water, where the danger of drowning exists, shall be provided with U.S. Coast Guard-approved life jacket or buoyant work vests.
29 CFR 1926.1404 · Assembly/Disassembly—general requirements (applies to all assembly and disassembly operations)
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.