Inspection 341897395 OPENED NOV 8, 2016Closed
9155 Rl Ostos Rd, Brownsville, TX 78521 · Farm and Garden Machinery and Equipment Merchant Wholesalers · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Since 2016, OSHA inspectors have visited Pitcock Supply, Inc. in Texas 2 times.
The most recent inspection opened on Nov 8, 2016 as part of a related case, in Brownsville.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $20,280; today they stand at $10,140, 50% less.
The rule cited most here is 1926.251 (rigging equipment for material handling), 3 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. Pitcock Supply, Inc. averages $10,140 across 1 cited inspection.
1 inspection on this page followed a fatal incident.
Texas · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Texas
Checking a subcontractor, a client or your own company? Watch Pitcock Supply, Inc. and get notified the morning OSHA posts a new citation for it.
Watch this company9155 Rl Ostos Rd, Brownsville, TX 78521 · Farm and Garden Machinery and Equipment Merchant Wholesalers · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
4805fm 809, Dawn, TX 79025 · Farm and Garden Machinery and Equipment Merchant Wholesalers · OSHA's record · Phone and website on Google Maps
Incident on Sep 9, 2016 (fatal): Employee is struck and killed by falling equipment
At approximately 9:00 a.m. on September 9, 2016, an employee was operating an impact wrench to tighten nuts and bolts on equipment used for grain handling. The grain handling equipment was raised above ground and held by a nylon strap attached to a telehandler. The strap broke and equipment fell. The employee was struck and killed by falling equipment.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1926.251(a)(1) · Rigging equipment for material handling |
Serious | $5,070 | $5,070 | Mar 9, 2017 | Final |
| Citation 1, item 1b OSH Act Section 5(a)(1) · General Duty Clause |
Serious | $5,070 | $0 | Mar 9, 2017 | Final |
| Citation 1, item 2a 29 CFR 1926.251(a)(6) · Rigging equipment for material handling |
Serious | $5,070 | $0 | Mar 9, 2017 | Final |
| Citation 1, item 2b 29 CFR 1926.251(e)(8)(iii) · Rigging equipment for material handling |
Serious | $5,070 | $5,070 | Mar 9, 2017 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1926.251(a)(1)
(a) General. (1) Rigging equipment for material handling shall be inspected prior to use on each shift and as necessary during its use to ensure that it is safe. Defective rigging equipment shall be removed from service.
29 CFR 1926.251(a)(6)
(6) Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.
29 CFR 1926.251(e)(8)(iii)
(iii) Snags, punctures, tears or cuts;
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.