Posco Aapc LLC has 2 OSHA inspections on record in Alabama, the first in 2017.
OSHA's last visit started on Feb 28, 2020 after a fatality or catastrophe, in Mc Calla.
Across those inspections OSHA issued 5 citation items: 4 serious and 1 other-than-serious.
OSHA proposed $25,345 in penalties. After settlements and reviews the total is $21,297, down 16%.
Most often, OSHA cited 1910.147, lockout/tagout (2 items).
For context, across all wholesale employers the median penalty per cited inspection since 2015 is $3,425. Posco Aapc LLC averages $10,648 over 2 cited inspections in that time.
1 inspection on this page followed a fatal incident.
It reported 2 severe injuries to OSHA since 2015.
Inspection 344663380 OPENED FEB 28, 2020Closed
Fatality or catastrophe · Complete · Safety · 74 employees at the site · Closed Sep 4, 2020
6500 Jefferson Metro Parkway, Mc Calla, AL 35111 · Rolled Steel Shape Manufacturing · OSHA's record · Phone and website on Google Maps
Incident on Feb 27, 2020 (fatal): Employee is struck in back by coil and is killed from blunt
At 4:22 p.m. on February 27, 2020, an employee was moving a coil with an overhead crane when it began to tilt. The employee was struck in the back by the coil as a coworker tried to slow the coil's fall but it trapped his foot underneath it The employee was killed from blunt force trauma.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1 |
Serious | $13,494 | $9,446 | Aug 5, 2020 | Final |
Inspection 342338670 OPENED MAY 17, 2017Closed
Referral · Partial · Safety · 54 employees at the site · Closed Aug 14, 2017
6500 Jefferson Metro Parkway, Mc Calla, AL 35111 · Metal Service Centers and Other Metal Merchant Wholesalers · OSHA's record · Phone and website on Google Maps
Incident on May 9, 2017: Employee's finger is amputated when pinched in steel coiling
At 4:00 p.m. on May 9, 2017, an employee and coworker were working at slitter AK#2 and had finished slitting a roll of steel. The employees were producing 9 separate rolls cut 6 inches wide. The employee banded seven steel rolls, two of which were damaged. The coworker was operating the machine controls while the employee worked to cut off the damage from the steel roll. After removing the damage, the machine operator dropped the hydraulically operated separator. The separator holds the ends of the coils. The machine operator forwarded the coils so that slack in the steel would be removed. While the coils were tightening, the employee placed a hand on a coil and the glove caught on a burr on one of the 6 inch cuts which pulled a finger between the steel coil and the separator. The finger was amputated.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1a |
Serious | $5,387 | $5,387 | Jun 23, 2017 | Final |
| Citation 1, item 1b |
Serious | $0 | $0 | Jun 23, 2017 | Final |
| Citation 1, item 2 |
Serious | $6,464 | $6,464 | Jun 23, 2017 | Final |
| Citation 2, item 1 |
Other-than-serious | $0 | $0 | Jun 23, 2017 | Final |
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Oct 2, 2017, Mc Calla: Amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee was using a separator to process a coil for final packaging when his right hand was caught between the separator and the coil, amputating his ring finger and lacerating his middle finger.
May 9, 2017, Mc Calla: Amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee was banding the coil on a recoiling machine when the coil came off of the track during the recoiling stage. The employee made some adjustments so the coil would line up correctly. A coworker then placed the separator down and used the manual control panel to finish the recoiling process. At that time, the employee's glove was caught between the lapse of the coil and was crushed by the…
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.