OSHA has inspected Precision Metal Products, Inc. 15 times in California since 1973.
The latest one began on Mar 3, 2025 after an accident, in El Cajon.
Those inspections ended with 96 citation items: 28 serious, 3 repeat and 65 other-than-serious.
Penalties were first proposed at $137,710 and now stand at $81,780, 41% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 6 items under 1910.213.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Precision Metal Products, Inc. averages $21,500 (3 cited inspections).
1 inspection on this page followed a fatal incident.
Precision Metal Products, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,139employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Precision Metal Products, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Dec 4, 2016 (fatal): One employee forging metal parts dies in flash fire while ot
At 11:15 a.m. on December 4, 2016, Employees #1 and #2 were forging metal flange parts in a CEFF powered press. A hydraulic cylinder seal failed, releasing a high pressure mist or stream of flammable hydraulic fluid onto employees. The fluids were ignited by the pilot light on the furnace, burning and killing Employee #1. Employee #2 suffered injuries that did not result in a hospitalization.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203(B)(2)
Other-than-serious
$375
$300
May 26, 2017
Final
Citation 1, item 2
29 CFR 3203(A)(7)
Other-than-serious
$560
$150
May 26, 2017
Final
Citation 1, item 3
29 CFR 4243(A)
Other-than-serious
$420
$150
May 26, 2017
Final
Citation 1, item 4
29 CFR 5194(E)(1)
Other-than-serious
$375
$150
May 26, 2017
Final
Citation 1, item 5
29 CFR 5194(H)(2)
Other-than-serious
$420
$0
May 26, 2017
Final
Citation 2, item 1
29 CFR 3203(A)(4)
Other-than-serious
$22,500
$0
May 26, 2017
Final
Citation 3, item 1
29 CFR 3328(A)
Serious
$18,000
$18,000
May 26, 2017
Final
Citation 4, item 1
29 CFR 3380(F)(1)
Serious
$13,500
$4,500
May 26, 2017
Final
Citation 5, item 1
29 CFR 5551(A)
Serious
$18,000
$9,000
May 26, 2017
Final
Inspection 315344366 OPENED APR 24, 2012Closed
Accident · Partial · Safety · 122 employees at the site · Closed Aug 1, 2012
Incident on Apr 11, 2012: Employee struck by metal shard from metal tool
At approximately 1:50 p.m. on April 11, 2012 Employee #1, a metal forger suffere d serious injury when a metal tool failed, shooting a piece of metal from a hydr aulic press into the Employee #1's abdomen. Employee #1, was transported to a lo cal area hospital, where he was hospitalized for more than three days.
No citations from this inspection.
Inspection 125873232 OPENED SEP 28, 2005Closed
Accident · Partial · Safety · 154 employees at the site · Closed Oct 9, 2006
Incident on Sep 12, 2005: Employee is injured when struck by metal object
At approximately 2:45 a.m. on September 12, 2005, Employee #1, a chemical mill o perator, was working in the chemical milling area of a facility that manufacture s precision metal products. The chemical milling area of the facility refines mi ssile fins that are manufactured to be attached to Advanced Medium Range Air-to- Air Missiles (AMRAM). During the milling process, the metal fins are placed on r acks that are attached to a hoist, which lowers and raises the missile fins in a nd out of large vats of 40-hydrofluoric-acid (HF). The HF further refines the fi ns, reducing their size and producing very sharp edges. Employee #1 was removing these fins, three at time, when one of the fins slipped from his hand and struc k his left leg just above his knee. This resulted in a deep cut, measuring about 4- to 5-inches long, that severed some arteries. Employee #1 was taken to Gross mont Hospital for treatment and was later transferred to Sharp Memorial Hospital , where he was hospitalized and underwent surgery to repair his knee.
Incident on Jun 21, 2005: Employee's toes are crushed by falling steel tube
At approximately 3:20 p.m. on June 21, 2005, Employee #1, working for Precision Metal Products, was helping a coworker load a slightly warped 6-inch diameter 16 -foot long steel tube, weighing approximately 2,000 pounds, onto a roller table. The coworker was using a Daewoo forklift to load the tube onto the roller table when the tube twisted off of the table and fell onto the right foot of Employee #1. He was transported to Grossmont Hospital where three of his toes were amput ated.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3328 D
Other-than-serious
$560
$450
Dec 21, 2005
Final
Citation 2, item 1
29 CFR 3385 A
Other-than-serious
$3,375
$450
Dec 21, 2005
Final
Inspection 300787629 OPENED NOV 26, 2001Closed
Unprogrammed other · Partial · Safety · 55 employees at the site · Closed Dec 21, 2001
Incident on Mar 10, 1995: Employee's ankle fractured by falling conveyor
A chip conveyor was being moved by a forklift, operated by Employee #1's supervi sor. Based on the supervisor's account, Employee #1 was ordered out of the area but returned to try to manually prevent the chip conveyor from falling from the forks of the forklift. The chip conveyor, weighing over 100 lb, fell on his ankl e, fracturing it. The only two witnesses were Employee #1 and his supervisor.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the El Cajon site logged 11 recordable injuries or illnesses among about 105 workers: 5.6 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 49 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Precision Metal Products
El Cajon · 2025
105
11
5
5.6
4.0
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Table Z-1—(1) Substances with limits preceded by “C”—Ceiling Values. An employee's exposure to any substance in Table Z-1, the exposure limit of which is preceded by a “C”, shall at no time exceed the exposure limit given for that substance. If instantaneous monitoring is not feasible, then the ceiling shall be assessed as a 15-minute time weighted average exposure which shall not be exceeded at any time during the working day.
29 CFR 1910.1000(a)(2)
(2) Other substances—8-hour Time Weighted Averages. An employee's exposure to any substance in Table Z-1, the exposure limit of which is not preceded by a “C”, shall not exceed the 8-hour Time Weighted Average given for that substance in any 8-hour work shift of a 40-hour work week.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.