OSHA SearchOSHA records by employer

Pro Builders Inc.: OSHA inspections and violations

Bedford, New Hampshire · Framing Contractors · NAICS 238130

1inspections
11citation items
$5,600current penalties
Mar 12, 2019last inspection

OSHA inspectors have visited Pro Builders Inc. in New Hampshire one time.

It opened on Mar 12, 2019 as a planned inspection, in Bedford.

In all, OSHA issued 11 citation items: 11 serious.

The proposed penalties came to $18,188; today they stand at $5,600, 69% less.

The rule cited most here is 1926.451 (scaffolds, general requirements), 4 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Pro Builders Inc. averages $5,600 across 1 cited inspection.

Pro Builders Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

New Hampshire · latest 90 days of OSHA records

50employers cited

6 of them in the same industry

Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Hampshire

Checking a subcontractor, a client or your own company? Watch Pro Builders Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343853768 OPENED MAR 12, 2019Closed

Planned · Partial · Safety · 6 employees at the site · Closed May 25, 2021

91 S River Road, Bedford, NH 03110 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.20(b)(2) · Construction safety programs
 Serious$2,842$1,400Mar 28, 2019Final
Citation 1, item 1b
29 CFR 1926.451(f)(3) · Scaffolds, general requirements
 Serious$0$0Mar 28, 2019Final
Citation 1, item 1c
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
 Serious$0$0Mar 28, 2019Final
Citation 1, item 1d
29 CFR 1926.451(b)(1) · Scaffolds, general requirements
 Serious$2,842$0Mar 28, 2019Final
Citation 1, item 1e
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
 Serious$0$0Mar 28, 2019Final
Citation 1, item 1f
29 CFR 1926.454(a) · Scaffold training
 Serious$2,842$0Mar 28, 2019Final
Citation 1, item 1g
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0Mar 28, 2019Final
Citation 1, item 2
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$2,842$1,400Mar 28, 2019Final
Citation 1, item 5
29 CFR 1926.501(b)(11) · Fall protection in construction
 Serious$3,978$1,400Mar 28, 2019Final
Citation 1, item 6a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$2,842$1,400Mar 28, 2019Final
Citation 1, item 6b
29 CFR 1926.1053(b)(5)(i) · Ladders in construction
 Serious$0$0Mar 28, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(5)(i)

(5)(i) Non-self-supporting ladders shall be used at an angle such that the horizontal distance from the top support to the foot of the ladder is approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support).

29 CFR 1926.20 · Construction safety programs

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.454 · Scaffold training

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in New Hampshire

Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.