Proampac Holdings LLC: OSHA inspections and violations
Cincinnati, Ohio · Plastics Bag and Pouch Manufacturing · NAICS 326111
3inspections
5citation items
$19,941current penalties
Mar 15, 2022last inspection
Since 2020, OSHA inspectors have visited Proampac Holdings LLC in Ohio 3 times.
The most recent inspection opened on Mar 15, 2022 on a referral, in Cincinnati.
In all, OSHA issued 5 citation items: 5 serious.
The proposed penalties came to $125,159; today they stand at $19,941, 84% less.
The rule cited most here is 1910.212 (machine guarding), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Proampac Holdings LLC averages $6,647 across 3 cited inspections.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
OSHA records show Proampac Holdings LLC at 2 sites in 2 states. Together they've had 4 inspections and $24,856 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 7, 2022, Cincinnati: Amputation · amputations · fingertip(s)
An employee was starting up an extrusion line. The employee came into contact with a nip point on a winder roll, which crushed the last joint of the employee's right middle finger and caused a fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(d)
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.