OSHA SearchOSHA records by employer

Quest Architectural Millwork: OSHA inspections and violations

Stafford, Texas · Other Millwork (including Flooring) · NAICS 321918

3inspections
9citation items
$17,331current penalties
Jun 1, 2016last inspection

Since 2015, OSHA inspectors have visited Quest Architectural Millwork in Texas 3 times.

The most recent inspection opened on Jun 1, 2016 after a complaint, in Stafford.

In all, OSHA issued 9 citation items: 7 serious and 2 other-than-serious.

The proposed penalties came to $34,662; today they stand at $17,331, 50% less.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Quest Architectural Millwork averages $8,666 across 2 cited inspections.

It reported 1 severe injury to OSHA since 2015.

Quest Architectural Millwork: OSHA citation items per year, 2015 to 2016
Citation items per year, by inspection date.

Want to know if OSHA cites Quest Architectural Millwork again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 341513760 OPENED JUN 1, 2016Closed

Complaint · Complete · Safety · 71 employees at the site · Closed Oct 19, 2016

13823 N. Promenade Blvd Suite 100, Stafford, TX 77477 · Other Millwork (including Flooring) · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
Serious$8,231$4,116Sep 2, 2016Final
Citation 1, item 2
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
Serious$8,231$4,116Sep 2, 2016Final

Inspection 341717627 OPENED JUN 1, 2016Closed

Follow-up · Complete · Safety · 71 employees at the site · Closed Jun 2, 2016

13823 N. Promenade Blvd Suite 100, Stafford, TX 77477 · Other Millwork (including Flooring) · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 340963164 OPENED OCT 5, 2015Closed

Referral · Partial · Safety · 71 employees at the site · Closed Feb 24, 2016

13823 N. Promenade Blvd Suite 100, Stafford, TX 77477 · Other Millwork (including Flooring) · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.134(c) · Respiratory protection
Serious$2,100$1,050Feb 5, 2016Final
Citation 1, item 2
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$4,900$2,450Feb 5, 2016Final
Citation 1, item 3a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$4,900$2,450Feb 5, 2016Final
Citation 1, item 3b
29 CFR 1910.178(l)(2)(ii) · Forklifts and other powered industrial trucks
Other-than-serious$0$0Feb 5, 2016Final
Citation 1, item 4
29 CFR 1910.307(c)(1) · Hazardous (classified) locations
Serious$3,500$1,750Feb 5, 2016Final
Citation 1, item 5
29 CFR 1910.1200(e)(1) · Hazard communication
Serious$2,100$1,050Feb 5, 2016Final
Citation 2, item 1
29 CFR 1910.141(g)(2) · Sanitation
Other-than-serious$700$350Feb 5, 2016Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Sep 28, 2015, Stafford: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was performing maintenance on a compressor, tightening the belt, when the motor froze. While attempting to turn on the compressor, his hand made contact with the belt and his right index finger was amputated to the first knuckle.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(e)(1)

(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(c)

(c) After completing the test exercises, the test administrator must question each test subject regarding the comfort of the respirator. When a test subject states that the respirator is unacceptable, the employer must ensure that the test administrator repeats the protocol using another respirator model.

29 CFR 1910.141 · Sanitation

29 CFR 1910.141(g)(2)

(2) Eating and drinking areas. No employee shall be allowed to consume food or beverages in a toilet room nor in any area exposed to a toxic material.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.307 · Hazardous (classified) locations

Other other millwork (including flooring) employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.