OSHA has inspected Robbins Manufacturing, Inc. 9 times in Wisconsin since 1999.
The latest one began on Nov 15, 2019 on a referral, in Fall River.
Those inspections ended with 7 citation items: 5 serious and 2 other-than-serious.
Penalties were first proposed at $37,561 and now stand at $24,436, 35% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 3 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Robbins Manufacturing, Inc. averages $6,512 (3 cited inspections).
Robbins Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
223employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Robbins Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Robbins Manufacturing, Inc. at 6 sites in 3 states. Together they've had 34 inspections and $81,489 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 6 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Nov 6, 2019: Employee crushes finger in bending machine, is later amputat
At 10:00 a.m. on November 6, 2019, an employee working as a machine operator for a metal fabrication business was bending a 5/8-inch steel rod using a Pines Manufacturing tube bender. The employee was beginning a production run of approximately 138 pieces of the steel rod at the employer's business. While bending the first several pieces, the employee had placed his hand on the collet to secure the rod during bending. As the employee was bending the 6th piece of rod his right ring finger got caught between the steel rod and the pressure die. The machine was equipped with Larco safety mats for machine guarding, but the mats had been moved to the back of the machine where they did not provide any safety beneficts. The employee crushed his finger and required hospitalization for surgical amputation of the fingertip.
Incident on Apr 20, 2018: Employee lacerates and fractures finger in drill press
At 7:40 a.m. on April 20, 2018, an employee was working on an Avery BMA-6 drill press and was drilling holes into parts. The employee was wiping some drill shavings from the press table when the drill caught the glove that the employee was wearing, lacerating and fracturing his left pinky. The employee's finger was later amputated under doctor's advice.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Fall River site logged 12 recordable injuries or illnesses among about 246 workers: 5.9 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 55 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Robbins Manufacturing, Inc.
Fall River · 2020
246
12
4
5.9
4.0
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Nov 6, 2019, Fall River: Amputation · amputations · fingertip(s)
An employee was holding a 2-foot section of tubing on a bender machine when the die closed on the employee's finger, resulting in an amputation to the right ring fingertip.
An employee was attempting to wipe something off a drill press table when the employee's glove was caught in the press, which then pulled the employee's hand into the drill bit. The employee's left pinky finger was injured and eventually had to be amputated.
Feb 9, 2015, Fall River: Hospitalization · traumatic injuries and disorders, unspecified · nonclassifiable
An employee was injured by forklift extensions when lifting a load of sheet metal.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(a)(4)
(4) Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.