OSHA SearchOSHA records by employer

SB Specialty Metals LLC: OSHA inspections and violations

Chicago, Illinois · Metal Service Centers and Other Metal Merchant Wholesalers · NAICS 423510

2inspections
5citation items
$15,318current penalties
May 16, 2019last inspection

OSHA has inspected SB Specialty Metals LLC 2 times in Illinois since 2017.

The latest one began on May 16, 2019 to follow up on an earlier case, in Chicago.

Those inspections ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $26,978 and now stand at $15,318, 43% lower after settlements or reviews.

Lockout/tagout comes up most often in these citations: 3 items under 1910.147.

How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,425, and SB Specialty Metals LLC averages $7,659 (2 cited inspections).

It reported 1 severe injury to OSHA since 2015.

SB Specialty Metals LLC: OSHA citation items per year, 2017 to 2019
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

426employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch SB Specialty Metals LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344015060 OPENED MAY 16, 2019Closed

Follow-up · Partial · Safety · 16 employees at the site · Closed Dec 9, 2019

4501 West Cortland, Chicago, IL 60639 · Metal Service Centers and Other Metal Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
Serious$5,636$2,818Oct 24, 2019Final

Inspection 342826583 OPENED DEC 11, 2017Closed

Referral · Partial · Safety · 16 employees at the site · Closed Aug 28, 2018

4501 West Cortland, Chicago, IL 60639 · Metal Service Centers and Other Metal Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Incident on Dec 4, 2017: Employee's finger is amputated while cleaning a saw

At 4:45 p.m. on December 4, 2017, an employee was cleaning an Oliver 8792 steel plate while it was still energized. As he climbed onto the saw to clean the chip chute, his right hand became caught between the clamp and chip chute, resulting in the amputation of his ring finger.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$7,114$4,500May 25, 2018Final
Citation 1, item 2
29 CFR 1910.147(d) · Lockout/tagout
Serious$7,114$4,000May 25, 2018Final
Citation 1, item 3
29 CFR 1910.178(l)(4)(iii) · Forklifts and other powered industrial trucks
Serious$7,114$4,000May 25, 2018Final
Citation 2, item 1
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Other-than-serious$0$0May 25, 2018Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Dec 4, 2017, Chicago: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was cleaning a steel plate saw's chip chute when his right ring finger was caught and amputated between the clamp and the chip chute. The saw was running at the time.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

29 CFR 1910.178 · Forklifts and other powered industrial trucks

OSH Act Section 5 · General Duty Clause

Other metal service centers and other metal merchant wholesalers employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.