Sheldon Manufacturing Inc: OSHA inspections and violations
Cornelius, Oregon · Medical Equipment and Supplies Manufacturing · NAICS 339111
13inspections
77citation items
$10,500current penalties
Apr 27, 2023last inspection
Sheldon Manufacturing Inc has 13 OSHA inspections on record in Oregon, the first in 1985.
OSHA's last visit started on Apr 27, 2023 after a complaint, in Cornelius.
Across those inspections OSHA issued 77 citation items: 30 serious, 6 repeat and 41 other-than-serious.
OSHA proposed $10,500 in penalties and the amount has not been reduced.
Most often, OSHA cited 7010.7600, (5 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Sheldon Manufacturing Inc averages $100 over 1 cited inspection in that time.
Sheldon Manufacturing Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
383employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
Incident on Aug 12, 1997: Employee injured when caught in turret press
At approximately 8:15 p.m. on August 12, 1997, Employee #1, the operator of an a utomatic turret press that was used to stamp sheet metal, placed the press in id le mode to clear scrap from the point of operation. He placed himself between th e point of operation table and the carriage used to auto-load the sheet steel. W hile his back was to the carriage, it began to move because it had been placed i n delayed mode. The carriage struck Employee #1 from behind and pushed him forwa rd onto the table. He became pinned between the table and the carriage in a forw ard facing, bent over position. Employee #1 remained in that position for approx imately four minutes, when he was discovered by a coworker. Employee #1 directed the coworker on how to shut off the machine and was immediately rescued from it . Emergency medical technicians responded, and he was transported to a nearby ho spital. Employee #1 was kept overnight for observation and was released the next day with superficial cuts and heavy bruising around the buttocks, back, abdomen , chest, and arms. He was scheduled to return to work in two weeks.
Incident on Sep 16, 1996: Employee's hands crushed by press
Employee #1, a press brake operator, was putting the last bend on a piece when i t fell behind the press to the stop. He reached for the piece with both hands an d inadvertently started the press with the foot pedal. The dies stopped at about 3/8 in. and crushed his hands.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Cornelius site logged 0 recordable injuries or illnesses among about 108 workers: 0.0 per 100 full-time workers, against a median of 1.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Manufacturing
Cornelius · 2022
108
0
0
0.0
1.1
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
(2) The employer shall ensure that each affected employee uses eye protection that provides side protection when there is a hazard from flying objects. Detachable side protectors (e.g. clip-on or slide-on side shields) meeting the pertinent requirements of this section are acceptable.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.