Solar Plastics LLC: OSHA inspections and violations
Delano, Minnesota · All Other Plastics Product Manufacturing · NAICS 326199
17inspections
53citation items
$12,478current penalties
Oct 31, 2022last inspection
Since 1973, OSHA inspectors have visited Solar Plastics LLC in Minnesota 17 times.
The most recent inspection opened on Oct 31, 2022 as a planned inspection, in Delano.
In all, OSHA issued 53 citation items: 22 serious, 1 repeat and 30 other-than-serious.
The proposed penalties came to $17,458; today they stand at $12,478, 29% less.
The rule cited most here is 1910.212 (machine guarding), 7 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Solar Plastics LLC averages $1,750 across 3 cited inspections.
Solar Plastics LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
379employers cited
13 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Delano site logged 22 recordable injuries or illnesses among about 106 workers: 22.1 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 59 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Delano site
Delano · 2019
106
22
5
22.1
2.6
Included with any plan: 1 more yearly log from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(b) Compressed gases. The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in § 1910.6.
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
29 CFR 1910.134(i)(7)
(7) For oil-lubricated compressors, the employer shall use a high-temperature or carbon monoxide alarm, or both, to monitor carbon monoxide levels. If only high-temperature alarms are used, the air supply shall be monitored at intervals sufficient to prevent carbon monoxide in the breathing air from exceeding 10 ppm.
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.