Plastech Corporation: OSHA inspections and violations
Rush City, Minnesota · All Other Plastics Product Manufacturing · NAICS 326199
22inspections
70citation items
$31,283current penalties
Oct 1, 2026last inspection
OSHA has inspected Plastech Corporation 22 times in Minnesota since 1985.
The latest one began on Oct 1, 2026 as a planned inspection, in Rush City.
Those inspections ended with 70 citation items: 29 serious and 41 other-than-serious.
Penalties were first proposed at $45,398 and now stand at $31,283, 31% lower after settlements or reviews.
Electrical wiring methods comes up most often in these citations: 10 items under 1910.305.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Plastech Corporation averages $3,220 (2 cited inspections).
Plastech Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
380employers cited
13 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Rush City site logged 19 recordable injuries or illnesses among about 277 workers: 6.9 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 71 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Plastech Corporation
Rush City · 2019
277
19
4
6.9
2.6
Included with any plan: 2 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.