OSHA SearchOSHA records by employer

Specialized Inspection Group: OSHA inspections and violations

Wauseon, Ohio · Other Lighting Equipment Manufacturing · NAICS 335129

1inspections
2citation items
$4,144current penalties
Mar 1, 2022last inspection

OSHA inspectors have visited Specialized Inspection Group in Ohio one time.

It opened on Mar 1, 2022 as part of a related case, in Wauseon.

In all, OSHA issued 2 citation items: 2 serious.

The proposed penalties came to $8,288; today they stand at $4,144, 50% less.

The rule cited most here is 1910.217 (mechanical power presses), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Specialized Inspection Group averages $4,144 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Specialized Inspection Group: OSHA citation items per year, 2022 to 2022
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

260employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Specialized Inspection Group and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345814990 OPENED MAR 1, 2022Closed

Unprogrammed related · Partial · Safety · 25 employees at the site · Closed Jul 25, 2022

135 E. Linfoot Street, Wauseon, OH 43567 · Other Lighting Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Feb 21, 2022: Employee amputates fingers in punch press

On February 21, 2022, three flashlight production line employees were tasked wit h performing flashlight assembly work. The three employees arrived on site in th e Flashlight Assembly Room at approximately 8:00 a.m., where they were tasked wi th duties that included, but not limited to, flashlight line assembly, back stri pping flashlights, and operating a mechanical punch press machine. Employee #1 was operating Machine #252 (Havir Manufacturing Co., Press-Rite Single Trip Clut ch Model #1-1/2 full revolution punch press machine) with pierce flashlight refl ector trim die (#1004-1 pierce flashlight). Employee #1 was tasked with operati ng machine #252 to pierce two to four boxes of raw product, i.e., metal reflecto r pieces that were approximately 6.3 inches in circumference with approximately 15,000 pieces per box. Machine #252 procedures required the operator to be in a seated position directly in front of the machine. Employee #1 manually fed t he raw product from the right side into the die, the point of operation, then pr essed the foot pedal, which tripped a full revolution clutch. After the foot pe dal is pressed, the machine would complete a cycle that resulted in two hole pun ches into the reflector piece, and the operator would manually remove the final product from the left side and place the piece into a finished product box. At a pproximately 11:15 a.m., during operation of machine #252, Employee #1 was manua lly handling a product piece with her left hand and activated the full revolutio n clutch by pressing her foot onto the foot pedal, which resulted in the first a nd second fingers of her left hand to be caught in the point of operation betwee n the die block and the punch plate of the die set. Employee #1 suffered amputat ion injuries of the first and second fingers of her left hand, requiring hospita lization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.217(c)(1)(i) · Mechanical power presses
Serious$4,144$2,072Apr 13, 2022Final
Citation 1, item 2
29 CFR 1910.217(e)(1)(i) · Mechanical power presses
Serious$4,144$2,072Apr 13, 2022Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Feb 21, 2022, Wauseon: Amputation · amputations · finger(s), fingernail(s), n.e.c.

At about 11:15 a.m. on February 21, 2022, an employee was loading a reflector onto a punch machine. The punch activated and cycled. It came down on the employee's left hand, resulting in partial amputations to the middle and index fingers to at least the first knuckle.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.217 · Mechanical power presses

29 CFR 1910.217(c)(1)(i)

(c) Safeguarding the point of operation—(1) General requirements. (i) It shall be the responsibility of the employer to provide and insure the usage of “point of operation guards” or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. See Table O-10.

29 CFR 1910.217(e)(1)(i)

(i) Under the general component of the inspection program, the employer shall:

Other other lighting equipment manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.