Stamco Industries Inc.: OSHA inspections and violations
Euclid, Ohio · Forging and Stamping · NAICS 332116
5inspections
32citation items
$20,295current penalties
Jun 16, 2016last inspection
OSHA has inspected Stamco Industries Inc. 5 times in Ohio since 1989.
The latest one began on Jun 16, 2016 after a complaint, in Cleveland.
Those inspections ended with 32 citation items: 18 serious and 14 other-than-serious.
Penalties were first proposed at $34,045 and now stand at $20,295, 40% lower after settlements or reviews.
Mechanical power presses comes up most often in these citations: 14 items under 1910.217.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Stamco Industries Inc. averages $14,000 (1 cited inspection).
Stamco Industries Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Euclid site logged 2 recordable injuries or illnesses among about 20 workers: 0.8 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 12 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Stamco Industries, Inc.
Euclid · 2023
20
2
2
0.8
2.7
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 14, 2017, Euclid: Amputation · amputations · fingertip(s)
An employee was hand clearing parts from a machine press. The manufactured part from the last cycle got stuck to the upper part of the die. When the employee went to reach for the part, it fell and struck his left middle finger resulting in a fingertip amputation. The part weighed approximately 21 lbs.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
29 CFR 1910.145 · Specifications for accident prevention signs and tags
29 CFR 1910.145(c)(3)
(3) Safety instruction signs. Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.