Standard Iron, Inc.: OSHA inspections and violations
Grand Island, Nebraska · Fabricated Structural Metal Manufacturing · NAICS 332312
4inspections
9citation items
$17,467current penalties
Jan 17, 2018last inspection
OSHA has inspected Standard Iron, Inc. 4 times in Nebraska since 2010.
The latest one began on Jan 17, 2018 on a referral, in Grand Island.
Those inspections ended with 9 citation items: 8 serious and 1 other-than-serious.
Penalties were first proposed at $30,684 and now stand at $17,467, 43% lower after settlements or reviews.
Mechanical power presses comes up most often in these citations: 2 items under 1910.217.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Standard Iron, Inc. averages $5,358 (2 cited inspections).
Standard Iron, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
31employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
Incident on Jan 9, 2018: Employee's right thumb and pinky finger are amputated by dri
At 9:00 p.m. on January 9, 2018, Employee #1 was assisting a coworker to drill holes in a steel pipe, using a Clasuing multiple headed drill press. As the coworker turned the pipe, Employee #1's hand was moved into the point of operation of the drill press. Employee#1's gloved right hand became caught in the unguarded rotating drill bit, causing the amputation of his right thumb and pinky finger.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Grand Island site logged 1 recordable injury or illness among about 94 workers: 1.1 per 100 full-time workers, against a median of 2.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Standard Iron and Wire Works LLC
Grand Island · 2025
94
1
0
1.1
2.4
Standard Iron and Wire Works
Grand Island · 2022
160
10
3
8.1
2.4
Included with any plan: 2 more yearly logs from these sites, back to 2022, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Dec 5, 2022, Grand Island: Hospitalization · multiple surface wounds and bruises · thigh(s)
A maintenance technician was adjusting a tension spring on a robot welding carousel. The technician asked the operator to cycle the rotating table so that he could observe and troubleshoot. As it rotated, the employee was struck by the leg of the robotic welder and sustained contusions and abrasions to the right thigh.
Jan 9, 2018, Grand Island: Amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee was drilling holes in a pipe when the employee's sleeve and glove became caught in the rotating drill bit, resulting in right thumb and pinky finger amputations.
Mar 4, 2016, Grand Island: Hospitalization · fractures (except skull fractures) and concussions · multiple body parts, n.e.c.
An employee was moving storage racks with a forklift when the forklift became stuck in the mud. The employee was putting boards under the tires with help from a coworker. The storage rack fell from the forklift and struck the employee. He sustained a crushed pelvis, broken ankle, broken ribs, and a head injury.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Nebraska the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.