OSHA has inspected Strong Structural Steel Ltd. 18 times in Texas since 2009.
The latest one began on Nov 3, 2025 after a complaint, in Pharr; the case is still open.
Those inspections ended with 40 citation items: 30 serious and 10 other-than-serious.
Penalties were first proposed at $146,784 and now stand at $107,385, 27% lower after settlements or reviews.
Fall protection comes up most often in these citations: 5 items under 1926.760.
How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Strong Structural Steel Ltd. averages $10,513 (8 cited inspections).
1 inspection on this page followed a fatal incident.
Strong Structural Steel Ltd. also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Strong Structural Steel Ltd. and get notified the morning OSHA posts a new citation for it.
Incident on Jan 17, 2020: Employee amputates fingertip when caught between two pieces
At 4:30 p.m. on January 17, 2020, an employee was attempting to separate metal square tubing. The employee decided to move the square metal tubing with his hand instead of using a hand tool. While attempting to position the tubing, the tubing rolled and bounced back from the railing that was holding it, causing the employee's finger to be caught between two pieces of tubing. The employee pulled his hand from the glove, but the glove was still stuck in between the tubing. The employee was hospitalized to treat an amputation of the tip of the left right finger.
No citations from this inspection.
Inspection 343945606 OPENED APR 19, 2019Closed
Fatality or catastrophe · Complete · Safety · 135 employees at the site · Closed May 2, 2023
Incident on Apr 17, 2019 (fatal): Employee is killed in fall from balcony
At 3:30 p.m. on April 17, 2019, an employee was installing decking on the second level when he fell off of the platform and struck his head against the ground, killing him.
Incident on Jul 3, 2018: Employee sustains multiple fractures when struck by loose ch
At 10:45 a.m. on July 3, 2018, an employee was flipping a steel frame via an overhead crane bridge when he was struck by a chain used to secure and control the frame. The employee sustained several fractures and was hospitalized.
Incident on Jan 17, 2018: Employee dismantling roof falls and breaks arm and hip
At 10:30 a.m. on January 17, 2018, Employee #1, employed by a steel construction company, was working at a one-story commercial building, a concession stand. He was on the building's roof and dismantling the metal frame that was not in compliance with the city's building code. As Employee #1 attempted to descend, he fell, first striking a plumbing fixture protruding from the wall and then hitting the concrete floor. Emergency services were called, and Employee #1 was transported to the hospital, admitted, and treated for fractures to his arm and hip.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Pharr site logged 0 recordable injuries or illnesses among about 137 workers: 0.0 per 100 full-time workers, against a median of 0.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Strong Structural Steel
Pharr · 2017
137
0
0
0.0
0.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
An employee was aligning metal beams on a table by hand before pushing them into a cutting machine when his hand was wedged between two beams, resulting in a left ring finger amputation.
Employees were installing floor decking on the second floor deck when one of the employees fell approximately 14 feet through the roof, landing on the concrete ground. The employee suffered head trauma.
An employee was welding a 25-foot steel A-frame. As the employee lifted the A-frame, a chain about 10 feet high came loose and the A-frame pinned them, causing a possible fracture to the left femur.
Jan 17, 2018, Mcallen: Hospitalization · fractures · multiple body parts, n.e.c.
While welding on a beam that was approximately 20 feet high, an employee fell to the ground, fracturing an arm and hip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Basic requirement. When an authorized government representative asks for the records you keep under part 1904, you must provide copies of the records within four (4) business hours.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.