Sunbelt Rentals, Inc.: OSHA inspections and violations
Orlando, Florida · Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing · NAICS 532412
11inspections
13citation items
$26,625current penalties
Sep 8, 2020last inspection
Since 1998, OSHA inspectors have visited Sunbelt Rentals, Inc. in Florida 11 times.
The most recent inspection opened on Sep 8, 2020 after a complaint, in Tampa.
In all, OSHA issued 13 citation items: 2 serious and 11 other-than-serious.
The proposed penalties came to $30,235; today they stand at $26,625, 12% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among real estate and rental employers, the typical cited inspection since 2015 ends with a $1,850 penalty. Sunbelt Rentals, Inc. averages $13,260 across 1 cited inspection.
4 inspections on this page followed a fatal incident.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Florida · latest 90 days of OSHA records
318employers cited
Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.
OSHA records show Sunbelt Rentals, Inc. at 25 sites in 4 states. Together they've had 35 inspections and $78,993 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 25 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Fatality or catastrophe · Complete · Safety · 15 employees at the site · Open
Disney Epcot Marocco Ave Of The Stars, Orlando, FL 32830 · Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing · OSHA's record · Phone and website on Google Maps
Incident on Mar 12, 2019 (fatal): Employee is ejected from aerial lift and is killed
At 5:11 p.m. on March 12, 2019, an employee was loading a JLG 300 aerial lift onto the bed of his truck. The aerial lift slipped off the bed of the truck while the employee was inside of the bucket of the aerial lift without a hard hat and no fall protection. He was ejected from the aerial lift bucket when it hit the ground. The employee landed on his head and was pronounced dead at the scene.
Incident on May 9, 2018 (fatal): Employee is killed when struck by falling mast
At 3:00 p.m. on May 9, 2018, Employee #1 was installing a five foot section of a buck hoist mast in the fifteenth floor. The employee only placed two of the four needed bolts to assemble the mast section. The mast pivoted on the two bolts, and the cab of the buck hoist fell, along with a section of the mast, striking and killing Employee #1.
No citations from this inspection.
Inspection 339771883 OPENED MAY 13, 2014Closed
Complaint · Partial · Safety · 65 employees at the site · Closed Aug 29, 2014
Follow-up · Partial · Safety · 17 employees at the site · Closed May 10, 2004
9315 Old Kings Road South, Jacksonville, FL 32257 · Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing · OSHA's record · Phone and website on Google Maps
Accident · Complete · Safety · 14 employees at the site · Closed Apr 29, 2004
9315 Old Kings Road South, Jacksonville, FL 32257 · Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing · OSHA's record · Phone and website on Google Maps
Incident on Oct 23, 2002 (fatal): Employee killed after being crushed by heavy machinery
On October 23, 2002, Employee #1, a mechanic, was diagnosing and repairing probl ems with a New Holland Skid Steer Model LS 170 machine. The machine was equipped with a shop-made towing attachment. The attachment was not removed prior to wor king on the machine. Employee #1 raised the boom arms and its attachment to work on the machine. The boom arms were not supported by the boom locks on the machi ne, or by any other means. Employee #1 was positioned under the raised arms and its attachment when they unexpectedly lowered and crushed him. Employee #1 died at the scene. The Medical Examiner listed the cause of death as crushing injurie s (contusions and fractures) of trunk with traumatic asphyxia due to heavy equip ment mishap. Employee #1 had not been trained by the employer regarding the spec ific correct energy control procedures to follow when servicing or maintaining t his machine.
Incident on Apr 9, 1998 (fatal): Employee killed by falling industrial truck
At approximately 7:00 a.m. on July 9, 1998, Employee #1 assisted by Employee #2 was attempting to load a street sweeper onto a roll back flat bed truck. The bed of the truck measured 24 ft 6 inches long by 8 ft 0.25 inches wide by 5 ft 0.75 inches high. The street sweeper measured 7 ft 8.5 inches long by 4 ft 10 inches wide by 4 ft 3 inches high and weighed 5,200 lbs. Employee #2 was operating the controls which raise and lower the truck bed by tilting it towards the ground. Employee #1 positioned the sweeper onto the bed of the truck and signaled Employ ee #2 to raise the bed of the truck to the horizontal position. Just before the bed of the truck reached the horizontal position the sweeper rolled backward and off the side of the truck, pinning Employee #1 to the ground. Employee #1 recei ved rib and pelvic fractures with Hem thoraces and Hem peritoneum due to a blunt impact to the torso. Employee #1 died.
No citations from this inspection.
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
On March 5, 2020, an employee was using a pressure washer to clean a scrubber. When the washer was activated, the wand jumped away from the hose and lacerated his left hand with water (pressurized at 3,500 psi). He was hospitalized.
Nov 2, 2017, Orlando: Hospitalization · fractures · ankle(s)
An employee was dismantling the scaffold, slipped on the stair tread and broke an ankle.
(3) How do I certify the annual summary? A company executive must certify that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(5)(iid)
(D) Identifiable. Lockout devices and tagout devices shall indicate the identity of the employee applying the device(s).
Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.