Tam International, Inc.: OSHA inspections and violations
Houston, Texas · Oil and Gas Field Machinery and Equipment Manufacturing · NAICS 333132
2inspections
10citation items
$8,575current penalties
Sep 14, 2015last inspection
Tam International, Inc. has 2 OSHA inspections on record in Texas, the first in 1996.
OSHA's last visit started on Sep 14, 2015 on a referral, in Houston.
Across those inspections OSHA issued 10 citation items: 7 serious and 3 other-than-serious.
OSHA proposed $10,850 in penalties. After settlements and reviews the total is $8,575, down 21%.
Most often, OSHA cited 1910.213, woodworking machinery (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Tam International, Inc. averages $6,300 over 1 cited inspection in that time.
Tam International, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Houston site logged 1 recordable injury or illness among about 112 workers: 0.8 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Houston Manufacturing
Houston · 2025
112
1
0
0.8
2.7
Houston Operations
Houston · 2025
7
0
0
0.0
2.7
Included with any plan: 16 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was machining a packing tube when a bushing on the bar came loose. The employee attempted to push the bushing back in place and his left hand got caught in the rotating bar, amputating his left index finger and fracturing the adjacent fingers. The employee was wearing gloves at the time of the incident.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Sources of ignition—(i) General. Adequate precautions shall be taken to prevent the ignition of flammable vapors. Sources of ignition include but are not limited to open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(3) Residue disposal. Residue scrapings and debris contaminated with residue shall be immediately removed from the premises and properly disposed of. Approved metal waste cans shall be provided wherever rags or waste are impregnated with finishing material and all such rags or waste deposited therein immediately after use. The contents of waste cans shall be properly disposed of at least once daily or at the end of each shift.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.