Glen Dale, West Virginia · Other Aluminum Rolling, Drawing, and Extruding · NAICS 331318
7inspections
27citation items
$109,466current penalties
Apr 16, 2026last inspection
Since 2011, OSHA inspectors have visited Tecnocap LLC in West Virginia 7 times.
The most recent inspection opened on Apr 16, 2026 on a referral, in Glen Dale and is still open.
In all, OSHA issued 27 citation items: 20 serious, 1 repeat and 6 other-than-serious.
The proposed penalties came to $147,351; today they stand at $109,466, 26% less.
The rule cited most here is 1910.212 (machine guarding), 7 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Tecnocap LLC averages $15,468 across 6 cited inspections.
Tecnocap LLC also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
West Virginia · latest 90 days of OSHA records
31employers cited
Get notified the morning OSHA posts each new citation in West Virginia: the employer, the site address, the rules broken and the penalty.
Incident on Nov 21, 2019: Employee amputates fingertip while cutting metal with manual
At 11:50 a.m. on November 21, 2019, an employee working as a machine operator for a crown and cap manufacturer was using a manually operated shear to cut small strips of thin metal. The employee had his right hand too close to the point of operation. There was no machine guarding on the shear. The employee amputated his middle fingertip on the shear blade and required medical treatment without hospitalization.
Incident on Jan 11, 2019: Employee fractures arm when drawn into machine gears
At 12:30 p.m. on January 11, 2019, an employee was running metal sheets through a machine that applies a wax coating onto the surface of the metal when his left arm's shirt sleeve was caught by some unguarded gears. The employee fractured his arm when it was pulled into the gears and was hospitalized. hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Glen Dale site logged 10 recordable injuries or illnesses among about 143 workers: 7.4 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 164 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Tecnocap LLC
Glen Dale · 2025
143
10
7
7.4
4.0
Tecnocap
Glen Dale · 2022
175
10
6
5.9
4.0
Tecnocap Glen Dale
Glen Dale · 2018
144
17
10
11.4
4.0
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Jun 28, 2024, Glen Dale: Hospitalization, amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was working alongside an electrician on a piece of equipment. When they manually turned the threader gears, their finger became caught between the gears. The end of the finger was amputated.
Nov 21, 2019, Glen Dale: Amputation · amputations · fingertip(s)
An employee was using a shear to cut thin pieces of metal. The shear activated while his right hand was at the cutting area and the tip of his right middle finger was amputated. The shear was unguarded at the time.
At approximately 2:12 PM, an employee was operating a wax machine when his left sleeve became caught in the gears of the machine, pulling his arm into the gears. He was hospitalized with a fractured left arm.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.10 · Recording criteria for cases involving occupational hearing loss
29 CFR 1904.10(a)
(a) Basic requirement. If an employee's hearing test (audiogram) reveals that the employee has experienced a work-related Standard Threshold Shift (STS) in hearing in one or both ears, and the employee's total hearing level is 25 decibels (dB) or more above audiometric zero (averaged at 2000, 3000, and 4000 Hz) in the same ear(s) as the STS, you must record the case on the OSHA 300 Log.
(3) How do I certify the annual summary? A company executive must certify that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete.
(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.
Alert subscribers get notified of each newly cited employer in West Virginia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.