El Paso, Texas · General Warehousing and Storage · NAICS 493110
12inspections
10citation items
$46,108current penalties
Jul 30, 2026last inspection
OSHA has inspected The Toro Company 12 times in Texas since 2002.
The latest one began on Jul 30, 2026 after a complaint, in El Paso.
Those inspections ended with 10 citation items: 5 serious and 5 other-than-serious.
Penalties were first proposed at $71,007 and now stand at $46,108, 35% lower after settlements or reviews.
Forklifts and other powered industrial trucks comes up most often in these citations: 3 items under 1910.178.
How that compares: the median penalty per cited inspection for transportation and warehousing employers since 2015 is $3,555, and The Toro Company averages $7,685 (6 cited inspections).
1 inspection on this page followed a fatal incident.
The Toro Company also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
6 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Dec 20, 2021: Employee burns arm while using molding machine
At 11:50 a.m. on December 20, 2021, an employee was setting up the mold machine to troubleshoot it. The employee had turned on the heaters to the mold injection gates. The employee had checked the injection gates on the operator side and found them to be operating properly. The employee went to check the gate operation on the non-operator side. The employee could not reach the solenoid to activate the gates with his right arm/hand, so he reached across the front of the mold with his left arm/hand. One of the injection gates on the operator side shot some hot molten material on to the employee's left arm, burning his upper arm. The employee was hospitalized for treatment.
Incident on Apr 6, 2021: Employee's finger is amputated while performing maintenance
At 12:45 p.m. on April 6, 2021, an employee was performing maintenance on an injection molding machine. While rotating a machine part, a pinch point was created between a large block and the machine. The employee's gloved finger was caught and crushed, resulting in an amputation. The employee was hospitalized for treatment.
Incident on Nov 13, 2019 (fatal): Employee is killed when pinned against rack by forklift
At 5:30 a.m. on November 13, 2019, an employee was working for a firm that provided warehousing and storage. He was operating a stand up forklift. He was moving material on pallets. He was driving the forklift at too high a speed. He struck the midrail of storage racks that were in back of him. He was pinned between the forklift and the rail of the rack. His upper torso was struck against the midrail by the forklift. He was killed.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the El Paso site logged 2 recordable injuries or illnesses among about 291 workers: 0.7 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
The Toro Company
El Paso · 2025
291
2
0
0.7
2.6
The Toro Company - El Paso Distribution Center
El Paso · 2025
73
1
1
1.4
2.6
El Paso site
El Paso · 2022
335
4
2
1.2
2.6
El Paso DC
El Paso · 2022
104
3
1
3.2
2.6
Included with any plan: 14 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 10, 2018, El Paso: Amputation · amputations · fingertip(s)
An employee was changing a die mold when the employee's finger was amputated just below the fingernail line.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(c) Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.