Since 2020, OSHA inspectors have visited Ufp Blanchester, LLC. in Ohio 6 times.
The most recent inspection opened on Nov 14, 2025 on a referral, in Blanchester.
In all, OSHA issued 15 citation items: 10 serious and 5 other-than-serious.
The proposed penalties came to $142,122; today they stand at $74,915, 47% less.
The rule cited most here is 1910.22 (walking-working surfaces), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Ufp Blanchester, LLC. averages $14,983 across 5 cited inspections.
Ufp Blanchester, LLC. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Feb 22, 2022: Employee punctures wrist while using nail gun
At 09:00 p.m. on February 22, 2022, an employee was assembling wooden pallets with compressed air-powered nail gun holding 2-inch nails. The employee inadvertently imbedded a nail in his left wrist and was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Blanchester site logged 8 recordable injuries or illnesses among about 107 workers: 6.9 per 100 full-time workers, against a median of 4.6 for its industry. Those cases cost 15 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
UFP Blanchester LLC
Blanchester · 2021
107
8
1
6.9
4.6
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Nov 11, 2025, Blanchester: Hospitalization · fractures · leg(s) unspecified
An employee was walking to lunch when a nearby forklift came to a stop and its load of lumber shifted forward, pinning the employee's left leg to the ground. The employee's leg was fractured.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.