OSHA SearchOSHA records by employer

Vision Machine, Inc.: OSHA inspections and violations

Spring, Texas · Machine Shops · NAICS 332710

1inspections
4citation items
$6,809current penalties
Nov 18, 2024last inspection

OSHA inspectors have visited Vision Machine, Inc. in Texas one time.

It opened on Nov 18, 2024 as a planned inspection, in Spring.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $11,349; today they stand at $6,809, 40% less.

The rule cited most here is 1910.212 (machine guarding), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Vision Machine, Inc. averages $6,809 across 1 cited inspection.

Vision Machine, Inc.: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Vision Machine, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347886525 OPENED NOV 18, 2024Closed

Planned · Partial · Safety · 14 employees at the site · Closed May 19, 2025

25045 Spring Ridge Dr., Spring, TX 77386 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$4,729$2,837Feb 18, 2025Final
Citation 1, item 2a
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$6,620$3,972Feb 18, 2025Final
Citation 1, item 2b
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$0$0Feb 18, 2025Final
Citation 2, item 1
29 CFR 1910.178(l)(4)(iii) · Forklifts and other powered industrial trucks
 Other-than-serious$0$0Feb 18, 2025Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(4)(iii)

(iii) An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other machine shops employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.