OSHA has inspected Weaber, Inc. 21 times in Pennsylvania since 1999.
The latest one began on Jan 30, 2024 on a referral, in Lebanon.
Those inspections ended with 87 citation items: 50 serious, 5 repeat and 32 other-than-serious.
Penalties were first proposed at $281,982 and now stand at $218,544, 22% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 18 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Weaber, Inc. averages $21,782 (9 cited inspections).
Weaber, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 15 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
295employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Incident on Aug 27, 2021: Employee amputates fingertip while clearing running sawblade
At 9:15 a.m. on August 27, 2021, an employee was working as a woodworking machine operator for a millwork manufacturer. The employee was operating Cutter #2, a Precision Parts Connection inverted swing cut-off jump saw to cross-cut out sections of bad wood. While using his hand to clear a piece of wood, the employee hit the foot pedal actuating the saw. As a result, the employee struck his left hand with the rotating sawblade. The employee received medical treatment without hosptitalization for a severe laceration to his thumb and an amputated index fingertip.
Incident on Feb 28, 2018: Employee is caught by chain and sprocket and amputates finge
At 5:30 p.m. on February 28, 2018, an employee was adjusting feeder brushes and chain when a coworker turned on the machine and caught the employee's thumb tip in a chain and sprocket pinch point. Hospitalization was not required. required.
Incident on Jan 4, 2018: Employee's finger is crushed between two board and is later
At 11:00 a.m. on January 4, 2018, an employee was retrieving boards from #97 slide line. While reaching for a board at the bottom of the slide, another board came down the slide and caught his right middle finger between the two boards. The employee's finger was fractured and lacerated, which was later amputated as a result of the severity of the injury.
No citations from this inspection.
13 older inspections
Inspection 342874989 OPENED JAN 11, 2018Closed
Planned · Partial · Safety · 45 employees at the site · Closed Aug 10, 2018
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Lebanon site logged 38 recordable injuries or illnesses among about 346 workers: 10.6 per 100 full-time workers, against a median of 4.2 for its industry. Those cases cost 46 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Headquarters
Lebanon · 2023
346
38
1
10.6
4.2
Choicewood
Titusville · 2023
44
1
1
2.3
4.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 15 reports on file, the 6 most recent shown.
Mar 19, 2025, Lebanon: Hospitalization, amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was operating a finger jointer machine when their hand was pulled into the machine, resulting in an amputation to their left ring fingertip.
Jun 11, 2024, Lebanon: Amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was sorting carts in the flow area when the tip of their ring finger was crushed between the cart they were moving and another cart, resulting in medical amputation of the fingertip.
Jan 23, 2024, Lebanon: Hospitalization, amputation · amputations involving bone loss · toes(s), toenail(s)
An employee was stepping from a platform onto a conveyor support to reach a board that was jammed. His right foot became caught on the roller drive chain, resulting in the amputation of two or three toes. The chain was not guarded at the time of the incident.
An employee was adjusting the position of a wood slab on a conveyor when their glove was caught between the slab and the frame of the entry chute. They sustained a laceration to the fourth finger and a partial amputation to the fifth finger on the right hand.
An employee was operating a molding machine when a board got jammed in the machine. The employee shut down the machine and was clearing the jam when his right hand contacted the still moving cutting blades resulting in an amputation.
Aug 27, 2021, Lebanon: Amputation · amputations · fingertip(s)
An employee was operating a chop saw to cross-cut out sections of bad wood. While clearing a piece of wood, the saw actuated, contacting the employee's left hand. The employee suffered a laceration to their thumb and index finger, and surgical amputation of the left index fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(c) Table Z-3. An employee's exposure to any substance listed in Table Z-3, in any 8-hour work shift of a 40-hour work week, shall not exceed the 8-hour time weighted average limit given for that substance in the table.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(c) Exposure control—(1) Exposure Control Plan. (i) Each employer having an employee(s) with occupational exposure as defined by paragraph (b) of this section shall establish a written Exposure Control Plan designed to eliminate or minimize employee exposure.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.